[asterisk-users] One PRI card with 2 (or more) Telcos

[Tiago Geada]

OK I found it.

In /etc/dahdi/system.conf

I have for this span:


# Span 7: TE4/1/3 "T4XXP (PCI) Card 1 Span 3" HDB3/CCS/CRC4
span=7,7,0,ccs,hdb3,crc4
# termtype: te
bchan=187-201,203-217
dchan=202
echocanceller=mg2,187-201,203-217


should I use "span=7,*5*,0,ccs,hdb3,crc4" instead? (5 is the first telco on
that card)

On 18 March 2011 18:23, Tiago Geada <tiago.geada at gmail.com> wrote:

> Hi! I can try that tho. Where do I configure what timer to use??!
>
> Thanks in advance.
>
> On 18 March 2011 18:21, Andrew Latham <lathama at gmail.com> wrote:
>
>> On Fri, Mar 18, 2011 at 3:17 PM, Adrian Serafini
>> <adrian-lists at wombit.com> wrote:
>> >
>> >> Is there a problem having 2 telcos on the same PRI card?
>> >
>> > I think you go with one master timer as the Telco.  Then the other spans
>> are
>> > secondary, tertiary, quaternary timers.
>> >
>> > Adrian
>>
>>
>> Adrian
>>
>> This only works when all the providers are using a common clock like
>> some areas in the USA.  This is not the case all around the world.
>>
>> --
>> ~~~ Andrew "lathama" Latham lathama at gmail.com ~~~
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110318/cbd026fe/attachment.htm>