[asterisk-users] [1.4] Failed callfile doesn't jumpto"failed"extension

[Danny Nicholas]

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gilles
Sent: Friday, March 18, 2011 10:45 AM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] [1.4] Failed callfile doesn't
jumpto"failed"extension

On Fri, 18 Mar 2011 10:14:37 -0500, "Danny Nicholas"
<danny at debsinc.com> wrote:
>exten => start,n,Playback(manolo_camp-morning_coffee)
>;exten => start,n,Hangup()
>exten => start,n,Goto(${EXTEN}-${REASON})
>
>;not run
>;exten => failed,1,NoOp(Call ended with ${REASON})
>
>;not run
>;exten => s,1,NoOp(Call ended with ${REASON})
>
>;empty
>;exten => h,1,NoOp(Call ended with ${REASON})
>
>;not run
>exten => start-NOANSWER,1,NoOp(Call ended with ${REASON})
>===============
>
>Is this what you had in mind?
>
>Thank you.
>
>That's the ticket.

Unfortunately, it can only jump to "h", and ${REASON} is empty.

Based on...

www.voip-info.org/wiki/view/Asterisk+dial+plan+-+working+example

... I also tried this, but Asterisk doesn't jump to any of those
extensions:
========= extensions.conf
...
exten => start,n,Playback(manolo_camp-morning_coffee)
;exten => start,n,Hangup()
;exten => start,n,Goto(${EXTEN}-${REASON})
exten => start,n,Goto(s-${DIALSTATUS},1)

exten => s-ANSWER,1,Hangup
exten => s-CANCEL,1,Hangup
exten => s-NOANSWER,1,Hangup
exten => s-BUSY,1,Busy ;Only works with SIP calls
exten => s-CHANUNAVAIL,1,Verbose(Not available)
exten => s-CONGESTION,1,Congestion
exten => _s-.,1,Congestion
exten => s-,1,Congestion
========= CLI
-- Executing [start at callback:5] Playback("DAHDI/1-1",
"manolo_camp-morning_coffee") in new stack
-- <DAHDI/1-1> Playing 'manolo_camp-morning_coffee.ulaw' (language
'fr')
== Spawn extension (callback, start, 5) exited non-zero on 'DAHDI/1-1'
-- Hungup 'DAHDI/1-1'
[Mar 18 16:41:35] NOTICE[1200]: pbx_spool.c:349 attempt_thread: Call
completed to Dahdi/1/5551234
=========

Is there no way to know how a call ended?

Thank you.

I believe you will achieve the desired result by replacing ${REASON} with
${HANGUP_CAUSE}.