[asterisk-users] Pushing info to a Polycom phone - from outside of the local network

[Mike]

I'm in a hosted PBX context. I'd like to push some strings ("Hello World")
from Asterisk to a Polycom phone's screen that is behind a NAT/firewall.
Basically as part of the SIP if possible, to make  it firewall friendly.

 

Is this even possible?

 

Part 2: Is this possible as part of a queue called (when I am not using the
dial command directly)?

 

I should have mentioned that I tried using the URL option in Queue(), but
that didn't seem to work using a Polycom 650.

 

So the problem was the following: I needed to activate the Polycom browser
by putting this in the Polycom config file : <mb mb.ssawc.enabled="1"/> 

 

...And then build a web site that was really, really simple as the Polycom
browser is a time machine trip back to 1993.

 

Mike

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110316/88a7be80/attachment.htm>