[asterisk-users] Bridged Digital call

[Richard Mudgett]

> Hi All
> 
> Just upgraded from 1.6? to 1.8.4.1
> 
> 
> I ised to be able to get a digital call working across a bridged isdn
> channel in 1.6 and 1.4 using the following;-
> 
> 
> exten => _X.,1,gotoif($[${TRANSFERCAPABILITY}=DIGITAL]?5:)
> exten => _X.,2,dial(DAHDI/g1/${EXTEN})
> exten => _X.,3,Noop(${CHANNEL})
> exten => _X.,4,hangup
> exten => _X.,5,(Set(CHANNEL(transfercapability)=DIGITAL)
> exten => _X.,6,dial(DAHDI/g1/${EXTEN})
> exten => _X.,7,hangup
> 
> 
> this still dials and aswers in 1.8 but no frames are passed and the
> call times out and drops
> 
> I have also tried
> 
> exten => _X.,1,gotoif($[${TRANSFERCAPABILITY}=DIGITAL]?5:)
> exten => _X.,2,dial(DAHDI/g1/${EXTEN})
> exten => _X.,3,Noop(${CHANNEL})
> exten => _X.,4,hangup
> exten => _X.,5,Noop
> exten => _X.,6,dial(DAHDI/g1d/${EXTEN})
> exten => _X.,7,hangup
> 
> with exactly the same outcome,

Both of these methods should work after doing a quick look a the code.

Does the outgoing call SETUP indicate digital capability?

Richard