[asterisk-users] Siemens gigaset as180 as a internal mobile extension

[Gordon Henderson]

On Tue, 14 Jun 2011, Florent THOMAS wrote:

> Le 12/06/2011 20:41, Florent THOMAS a écrit :
>> Le 11/06/2011 17:54, Gordon Henderson a écrit :
>>> On Sat, 11 Jun 2011, Florent THOMAS wrote:
>>> 
>>>> Hy all of you,
>>>> 
>>>> Is anybody has a tutorial for integrate a siemens gigaset as180 and 
>>>> connect it to Asterisk.
>>>> I've searched a lot and didn't found something concluding.
>>> 
>>> The AS180 is just a bog-standard analogue DECT phone. So like any other 
>>> analogue phone, to use it with asterisk, you need an analogue card (eg. 
>>> tdm400p) or an ATA.
>>> 
>>> Personally, I'd use one of the Gigaset IP range of phones - these are SIP 
>>> compatable. (e.g. A580IP, etc.) They do work very well. I've deployed a 
>>> fair few in the past few years.
>>> 
>>> (And they're just Gigaset now - split from Siemens AIUI, although I 
>>> suspect it'll be a long time before everyone catches-up!)

>> I'll try it ASAP and let you know.

> Hy Gordon,
>
> I checked my devices and observed that I'm the owner of 2 LinkSys SPA2102-R 
> configured by keyyo.
> I used the Voice interaction menu to reset the device.
> Unfortunately it stills asking me a password.

I don't really know much about the SPA devices, sorry. (the only ATAs I've 
really used have been Grandstreams) It sounds like they might be locked 
into the "keyyo" service (if that's an ITSP who provided them 
pre-configured)

Gordon