[asterisk-users] How to configure unused BRI ports from a HA8 board ? [SOLVED]

[Olivier]

2011/6/15 A J Stiles <asterisk_list at earthshod.co.uk>

> On Wednesday 15 Jun 2011, Olivier wrote:
> > At the moment, my console is full with messages such as :
> > [Jun 15 09:06:25] WARNING[2140]: chan_dahdi.c:3369 pri_find_dchan: No
> > D-channels available!  Using Primary channel 9 as D-channel anyway!
> > [Jun 15 09:06:25] WARNING[2141]: chan_dahdi.c:3369 pri_find_dchan: No
> > D-channels available!  Using Primary channel 12 as D-channel anyway!
> >
> > These messages relate to ports 3 and 4 which are unused and unplugged.
> > I can connect those 2 ports to each other (using a straight RJ11-RJ11
> cable
> > ?) and tie them to an used DAHDI group but this wouldn't work for a
> single
> > port and I'm wondering if a smarter solution exists.
> >
> > Suggestions ?
>
> Make sure the entries for these ports are commented out
> in /etc/dahdi/system.conf and /etc/asterisk/chan_dahdi.conf .
>

Great : this did it !

Usually, I'm using dahdi_genconf to generate Dahdi config but I must say I
couldn't manage to generate NT configs or to disable some ports with it
(could you ?).

Thanks for helping.

>
> --
> AJS
>
> Answers come *after* questions.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110615/5f7874bd/attachment.htm>