[asterisk-users] ControlPlayback's options
virendra bhati
virbhati at gmail.com
Sat Jun 4 06:38:20 CDT 2011
Hi Johan Wilfer,
Thanks for your reply. On the basis of your provided code I made all things
into extensions.conf. But i have an small issue on which I need your
attention again.
in below context what's ${tz} ? Is this time zone value or else?
and another things is what is the use of SayUnixTime(${time},${tz},d
'digits/of' B);
this function in such case?
context conference_play_recordings_
conference_paused {
announce => {
Set(time=$[${epoch_start}+${position}/1000]);
while(true) {
WaitExten(1);
Background(conf_playrec_pause_part1);
SayUnixTime(${time},${tz},kM);
Background(conf_playrec_pause_part2);
SayUnixTime(${time},${tz},d 'digits/of' B);
Background(conf_playrec_pause_part3);
WaitExten(5);
}
}
one thing which is also confusing is that what is the meaning or use of such
lines in this application.
ControlPlayback(${filename},60000,3,1,*#2456790,,,o(${position}))
Please put some light on these too.
On Wed, Jun 1, 2011 at 1:50 AM, Johan Wilfer <lists at jttech.se> wrote:
> On 2011-05-30 14:32, virendra bhati wrote:
>
> Hi List,
>
> Asterisk 's *ControlPlayback* will used for play any recorded file as an
> audio player. Is it possible that we can use it for multiple forward and
> rewind ?
>
> ex:-
> original: ControlPlayback(filename,skipms,ff,rew,stop,pause)
> expected
> ControlPlayback(filename,skip1,skip2,skip3,forward1,rewind1,forward2,rewind2,forward3,rewind3,stop,pause)
> :
>
>
> Yes, you can use the CPLAYBACKSTATUS, CPLAYBACKOFFSET and CPLAYBACKSTOPKEY
> variables to get this behavior.
> All you have to do is to list the additional keys and stop keys and
> implement this in your dialplan...
>
> I've attached some ael I use for this to implement 1 and 3 as 1 minute
> rewind/forward. 4 and 6 as 5 minutes rewind/forward and 7 and 9 as 15
> minutes.
> 5 I use as the pause key, and */# to switch recording.
>
> Greetings,
> Johan Wilfer
>
> ----
>
>
> context conference_play_recordings_conference_connect {
> playrec_intro => {
> Set(position=0);
> goto play,1;
> }
>
> play => {
> while (true) {
> if (${position}==-1) { goto recording_end,1; }
>
> //rewind 5 seconds after every action (so the user doesn't feel
> lost...)
> Set(position=$[${position}-5000]);
> if (${position} < 0) { Set(position=0); }
>
> ControlPlayback(${filename},60000,3,1,*#2456790,,,o(${position}));
> Set(position=${CPLAYBACKOFFSET});
>
> if (${CPLAYBACKSTATUS}==ERROR) {
> Playback(pbx_error_500);
> Playback(pbx_endcall);
> Wait(2);
> Hangup();
> }
>
> //If stopped by user
> if (${CPLAYBACKSTATUS}==USERSTOPPED) {
> if (!${ISNULL(${CPLAYBACKSTOPKEY})}) { goto
> ${CPLAYBACKSTOPKEY},1; }
> }
> }
> }
>
> recording_end => {
> //The end of the recording is reached
> Set(position=0);
> Background(pbx_endcall);
> WaitExten(2);
> Hangup();
> }
>
> 1 => {
> Set(position=$[${position}-60000]); //Rewind 1 minute
> goto play,1;
> }
>
> 2 => {
> //Instructions, that could be aborted with 2.
> //1 and 3 could be used to forward/rewind 0 ms effectivly disabling
> the defalut..
> ControlPlayback(conf_playrec_instructions_full,0,1,3,2);
> Wait(1);
> goto play,1;
> }
>
> 3 => {
> Set(position=$[${position}+60000]); //Forward 1 minute
> goto play,1;
> }
>
> 4 => {
> Set(position=$[${position}-300000]); //Rewind 5 minutes
> goto play,1;
> }
>
> 5 => {
> goto conference_play_recordings_conference_paused, announce, 1;
> //Pause
> }
>
> 6 => {
> Set(position=$[${position}+300000]); //Forward 5 minutes
> goto play,1;
> }
>
> 7 => {
> Set(position=$[${position}-900000]); //Rewind 15 minutes
> goto play,1;
> }
>
> 9 => {
> Set(position=$[${position}+900000]); //Forward 15 minutes
> goto play,1;
> }
>
> 0 => {
> goto playrec_intro,1; //Restart playback of the current recording
> }
>
> * => {
> //Previous recording
> //If no recording found, resume playback
> goto play,1;
> }
>
> # => {
> //Next recording
> //If no recording found, resume playback
> goto play,1;
> }
>
> i => {
> goto play,1;
> }
>
> }
>
> context conference_play_recordings_conference_paused {
> announce => {
> Set(time=$[${epoch_start}+${position}/1000]);
> while(true) {
> WaitExten(1);
> Background(conf_playrec_pause_part1);
> SayUnixTime(${time},${tz},kM);
> Background(conf_playrec_pause_part2);
> SayUnixTime(${time},${tz},d 'digits/of' B);
> Background(conf_playrec_pause_part3);
> WaitExten(5);
> }
> }
>
> i => {
> //Every inputs goes here
> Wait(1);
> goto conference_play_recordings_conference_connect,play,1;
> }
> }
>
>
>
>
> -----
> Thanks and regards
>
> Virendra Bhati
> +91-9172341457
> Asterisk Engineer
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> Med vänlig hälsning
>
> Johan Wilfer email: johan at jttech.se
> JT Tech | Utvecklare webb: http://jttech.se
> direkt: +46 31 380 91 01 support: +46 31 380 91 00
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
-----
Thanks and regards
Virendra Bhati
+91-9172341457
Asterisk Engineer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110604/236886d8/attachment.htm>
More information about the asterisk-users
mailing list