[asterisk-users] Connect asterisk to normal telephone PBX
michael k
michael at inapp.com
Thu Jul 28 09:12:47 CDT 2011
Thanks for the reply. I am using an analog phone in normal PBX. I have an
extension called 199 in asterisk and an extension 264 in analog PBX. So how
do i create an inbound or outbound routes for call between these two
extentions ?
On Thu, Jul 28, 2011 at 1:39 PM, Carlos M Cruz <carlosmocruz at gmail.com>wrote:
> Hi,
>
> Did you created your normal Inbound and Outbound routes in freepbx? For use
> with your zap channels?
>
> You'll problably have to change your routes on your pbx too...
>
> Regards,
>
> Carlos M Cruz
>
> 2011/7/28 michael k <michael at inapp.com>
>
>> Hello All,
>>
>> I don't even know the relevancy of my question. Please answer me if my
>> question have some sense.
>>
>> I have recently implemented an asterisk server with freepbx. I have
>> created 100 extentions and i can make successful calls between extensions
>> from anywhere. But my office have three different land-line numbers and
>> three of them are terminating into an internal PBX ( normal matrix telephone
>> PBX) with more than 60 extensions. This internal PBX is the live PBX where
>> we can call local, STD and ISD from extensions.
>>
>> At present i have some practical difficulties to configure telephone lines
>> at the end of asterisk PBX. So i am trying to connect my asterisk PBX to the
>> normal telephone PBX.
>>
>> I have installed 1 port x100p FXO card in my asterisk PBX and detected by
>> my freepbx. Then i removed my normal telephone extension cable from phone
>> and connected to the FXO port of my asterisk PBX.
>>
>> Ultimately my intention is that
>>
>> 1) if somebody call to my normal telephone extension, that should reach to
>> my asterisk server, and asterisk server should send this call to my asterisk
>> extension.
>> 2) if i am calling from my asterisk extension, call should go to the
>> normal telephone PBX via FXO card in my asterisk server and ultimately the
>> call should send outside via the telephone PBX.
>>
>>
>> Is my approach is correct ? If it is wrong please somebody assist me to
>> connect my asterisk PBX to normal telephone PBX.
>>
>> Michael.K
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110728/e3484874/attachment.htm>
More information about the asterisk-users
mailing list