[asterisk-users] simple outbound call from asterisk to T1 card

[Eric Wieling]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> ADAK, INDRANIL (ATTSI)
> Sent: Thursday, July 07, 2011 8:58 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] simple outbound call from asterisk
> to T1 card
>
> Hello,
> I have a T1 card installed and  is connected to PBX. I want
> to make outbound call to check if asterisk and t1 is working
> or not. The dhadi drivers are installed and the pri port is
> showing up and active. But calls are not going through. Can
> somebodu pdvise how to go about it ? I am sending you the
> call files and extensions.conf file details.
>
> Made a call file and
> channel: DAHDI/g0/9042021237 at testing-context
> MaxRetries: 1
> RetryTime: 20
> WaitTime: 20
> Application: playback
> Data: demo-congrats
>
> *****I also added the following to the extensions.conf file
> [globals] TRUNK_1=DAHDI/g0 [testing-context] exten =>
> _904XXXXXXX, 1, Dial(${TRUNK_1}/634,,D(86w904XXXXXXX))
>    same => 2, playback(demo-congrats)
>    same => 3, hangup()
> ***** I ALSO GET SAME WITH
> [globals]
> TRUNK_1=DAHDI/g0
> [testing-context]
> exten = s,1,Verbose(5,Dialing)


WRONG: channel: DAHDI/g0/9042021237 at testing-context
RIGHT: channel: DAHDI/g0/9042021237