[asterisk-users] B410P: DAHDI BRI PTMP HDLC Abort (6) on Primary D-channel of span 1 (TEI Errors)

[Matt Riddell]

Hi all,

So, we reverted the LibPRI version and tested it, and then tried with 
the latest version of everything.  Still no changes.

The BRI line is in PTMP.  If we set the configs to PTMP in the 
genconf_parameters and try it, we get the following:

[Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: 
Unable to receive TEI from network!

If we set it to PTP (which it is not) we get the following message:

[Jan 21 17:33:42] ERROR[20418]: chan_dahdi.c:12645 dahdi_pri_error: 
Received MDL/TEI managemement message, but configured for mode other 
than PTMP!

So, with PTMP it says we don't get a TEI message and without it, it says 
we do!

:)

Either way we also get the following message non stop in the console:

[Jan 21 17:33:42] NOTICE[20419]: chan_dahdi.c:12946 pri_dchannel: PRI 
got event: HDLC Abort (6) on Primary D-channel of span 2
[Jan 21 17:33:42] NOTICE[20419]: chan_dahdi.c:12946 pri_dchannel: PRI 
got event: HDLC Abort (6) on Primary D-channel of span 1

If we change the hardhdlc to dchannel instead the message goes away, but 
obviously it doesn't work :)

So, anyone have any ideas?

-- 
Cheers,

Matt Riddell
_______________________________________________

http://www.venturevoip.com/news.php (Daily Asterisk News)
http://www.venturevoip.com/exchange.php (Full ITSP Solution)
http://www.venturevoip.com/cc.php (Call Centre Solutions)