[asterisk-users] Inbound routes

[Dale Noll]

This is how I have done it.

In FreePBX, under the 'Setup' tab, choose 'Zap Channel DIDs'.  Assign a 
DID (ex. 12345) to the channel(port).

Then go to 'Inbound Routes' and create a route for the DID and set the 
destination to the appropriate extension.


On 01/21/2011 08:21 AM, Vitor Carlos Flausino wrote:
>> This is because FXO ports do not support DID. You need to route the
>> call
>> based on the port it came in on, not based on a DID.
>>
> Ok... And how do I do that? I'm using freePBX.
>