[asterisk-users] 1.8.2: dahdi-2.4: calls dropping
sean darcy
seandarcy2 at gmail.com
Tue Jan 18 18:55:34 CST 2011
On 01/18/2011 05:27 PM, Shaun Ruffell wrote:
> On 01/18/2011 04:06 PM, Danny Nicholas wrote:
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of sean darcy
>> Sent: Tuesday, January 18, 2011 3:58 PM
>> To: asterisk-users at lists.digium.com
>> Subject: [asterisk-users] 1.8.2: dahdi-2.4: calls dropping
>>
>> Here's a call coming in over PSTN to dahdi/4, connected to a local
>> extension dahdi/1:
>>
>> -- Executing [s at incoming-pstn-line:1] Answer("DAHDI/4-1", "") in
>> new stack
>> ..........
>> -- Executing [s at incoming-pstn-line:6] Dial("DAHDI/4-1",
>> "DAHDI/g0,36") in new stack
>> -- Called g0
>> -- DAHDI/1-1 is ringing
>> -- DAHDI/1-1 is ringing
>> -- DAHDI/1-1 answered DAHDI/4-1
>> -- Native bridging DAHDI/4-1 and DAHDI/1-1
>> -- Hanging up on 'DAHDI/1-1'
>> -- Hungup 'DAHDI/1-1'
>> == Spawn extension (incoming-pstn-line, s, 6) exited non-zero on
>> 'DAHDI/4-1'
>> -- Hanging up on 'DAHDI/4-1'
>> -- Hungup 'DAHDI/4-1'
>>
>> I'm on dadhi/1. After 10-15 minutes, the call just drops. What gives?
>>
>> sean
>>
>> Just a WAG - the bridge isn't really happening and you're getting a dial
>> timeout.
>>
>
> If you were running trunk...this is a very good guess. The following
> commit resolved an issue with bridging that's been in trunk for the past
> few weeks.
>
> http://svn.asterisk.org/view/dahdi?view=revision&revision=9642
>
> Cheers,
> Shaun
>
Wasn't running trunk. It was the 1.8.2 release. Not sure I understand:
the dial timeout is 36 seconds. Yet the call doesn't drop for at least
5, probably 10, maybe more minutes.
And no audio was muted while the call was up. It was all just fine.
sean
More information about the asterisk-users
mailing list