[asterisk-users] Calling rules

[Vitor Carlos Flausino]

----- Original Message -----
> From: "Steve Edwards" <asterisk.org at sedwards.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
> Sent: Tuesday, January 18, 2011 8:06:47 PM
> Subject: Re: [asterisk-users] Calling rules
> Un-top-posting and discarding cruft...
> 
> On Tue, 18 Jan 2011, Vitor Carlos Flausino wrote:
> 
> > Users, have to dial "0" to get an external line, and afterwords the
> > number they want to dial (exe 12345). The thing is:
> >
> > 1-If user dial "012345" there is an error and the call isn't made
> > and
> > the error is "handle_request_invite: Call from 'XXX' to extension
> > '012345' rejected because extension not found in context
> > 'DLPN_DialPlanX'. 2-If user dials "0" waits for the signal, and then
> > dials "12345" then it works fine.
> >
> > Should the result be the same? Shouldn't asterisk automatically
> > "dial"
> > 0, wait and then dial the external number?
> 
> > From: "Danny Nicholas" <danny at debsinc.com>
> 
> > My best guess is that it is a "dialplan inconsistency". The
> > "standard" for
> > "outside line" dialing is something like this:
> > - exten => 0.,1,Dial(DAHDI/1,${EXTEN:1})
> > Where the dialplan "chomps" the first digit off of the dialed
> > string.
> 
> On Tue, 18 Jan 2011, Vitor Carlos Flausino wrote:
> 
> > exten =
> > _0,1,Macro(trunkdial-failover-0.3,${trunk_1}/${,${EXTEN:1})},,trunk_1,)
> >
> > Notice the difference between your "0." and my "_0".
> >
> > Is "mine" correct?
> 
> Both are 'wrong.'
> 
> I'm guessing Danny just typed that in off the top of his head -- he
> forgot
> the leading underscore in the pattern.
> 
> Please read up on pattern matching. In particular, what '_' and '.'
> mean.
> 
> http://www.voip-info.org/tiki-index.php?page=Asterisk%20config%20extensions.conf
> http://www.voip-info.org/wiki/view/Asterisk+Dialplan+Patterns
> http://www.voip-info.org/wiki/view/Asterisk+Extension+Matching
> 
> Should get you started.
> 
Correcting the line to:

exten => _0.,1,Macro(trunkdial-failover-0.3,${trunk_1}/${,${EXTEN:1})},,trunk_1,)

problem persists...

any other suggestions?


Best regards,
-vcf