[asterisk-users] Problem installing FXS module in old digium 4 channel tdm card

[C F]

This is the closest thing I was able to find in my wctdm.c file:
        if ((blah & 0xf) == 2) {
                /* ProSLIC 3215, not a 3210 */
                wc->flags[card] |= FLAG_3215;
        }
If I take out the 2 first lines I get errors when compling.


On Tue, Feb 22, 2011 at 11:43 PM, Shaun Ruffell <sruffell at digium.com> wrote:
> On Tue, Feb 22, 2011 at 11:00:22PM -0500, C F wrote:
>> On Mon, Feb 21, 2011 at 11:23 PM, Shaun Ruffell <sruffell at digium.com> wrote:
>> > On 2/21/11 4:46 PM, C F wrote:
>> >> I just installed an FXS module onto a 4 channel tdm thats about 5
>> >> years old and it wont work. Running dmesg I can see the following
>> >> error:
>> >>
>
> [snip]
>
>> >>  !!!!! Init Indirect Registers UNSUCCESSFULLY.
>> >> Indirect Registers failed verification.
>> >> Module 0: FAILED FXS (FCC)
>> >> Module 1: Installed -- AUTO FXO (FCC mode)
>> >> Module 2: Installed -- AUTO FXO (FCC mode)
>> >> Module 3: Installed -- AUTO FXO (FCC mode)
>> >> Found a Wildcard TDM: Wildcard TDM400P REV E/F (3 modules)
>> >>
>> >> Does this have to do with the fact that the module is way newer than the
>> >> card?
>> >>
>> >
>> > Not having much direct experience with the wctdm.c driver, that would be my
>> > guess. You might be able to edit the wctdm_proslic_insane() function to
>> > force the FLAG_3215 on for the card and see if that gives you a different
>> > result.
>> >
>>
>> How/Where would I do that?
>>
>
> Around line 1297 of drivers/dahdi/wctdm.c you could change:
>
>  if (wctdm_getreg(wc, card, 1) & 0x80)
>                /* ProSLIC 3215, not a 3210 */
>                wc->flags[card] |= FLAG_3215;
>
>  to
>
>  wc->flags[card] |= FLAG_3215;
>
> and just skip the read of register 1. I don't know if this will work in your
> case, but it's something to try.
>
> --
> Shaun Ruffell
> Digium, Inc. | Linux Kernel Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> Check us out at: www.digium.com & www.asterisk.org
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>