[asterisk-users] [Dahdi 2.4.0] DAHDI_CHANCONFIG failed on channel 1

[Shaun Ruffell]

On 2/21/11 4:52 PM, Gilles wrote:
> Hello
>
> On a brand new CentOS 5.5 host, I wanted to install Dahdi before
> installing Asterisk 1.4.x.
>
> So I untarred dahdi-linux-complete-2.4.0+2.4.0.tar.gz, followed by
> make, make install, make config.
>

[snip]

> Here's what "tail /var/log/messages" shows:
> ============
> # tail /var/log/messages
> ...
> Feb 21 22:44:54 centos kernel: fd != ff
> Feb 21 22:44:54 centos kernel: fe != ff
> Feb 21 22:44:54 centos kernel: Freshmaker failed register test
> Feb 21 22:44:54 centos kernel: wctdm: probe of 0000:04:0a.0 failed
> with error -5
> ============
>
> Has someone seen this? Is my Dahdi configuration wrong, or is it some
> issue between Dahdi and CentOS?
>
> Thank your for any help.

I don't have much direct experience with the cards supported by the 
wctdm driver, but based on what you show here, it appears more like 
either a fundamental PCI bus incompatibility, the card isn't seated 
properly in the slot, or failed hardware.

-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org