[asterisk-users] trunk not working if I register a phone at the same IP as the trunk peer's IP
Ricardo Carvalho
rjcarvalho.lists at gmail.com
Mon Feb 21 12:04:28 CST 2011
Thanks Faisal, in fact I made a test that confirmed that in realtime
asterisk doesn’t supported static peers, like you told me.
Do you know if newer versions of asterisk, like 1.8, have this issue already
solved?
Regards,
Ricardo.
On Wed, Feb 16, 2011 at 6:26 PM, Faisal Hanif <faisal at vopium.com> wrote:
> I have played a lot on this issue with asterisk config but in realtime it
> doesn’t supported static peers with version 1.6.2.14.
>
>
>
> *From:* Ricardo Carvalho [mailto:rjcarvalho.lists at gmail.com]
> *Sent:* Wednesday, February 16, 2011 10:21 PM
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Cc:* Faisal Hanif
> *Subject:* Re: [asterisk-users] trunk not working if I register a phone at
> the same IP as the trunk peer's IP
>
>
>
> Isn't this a limitation that can be surpassed with some configuration that
> I'm lacking in my sip.conf or extensions.conf of my asterisk?
>
>
>
> Ricardo.
>
>
>
>
>
>
>
>
>
> On Wed, Feb 16, 2011 at 4:54 PM, Faisal Hanif <faisal at vopium.com> wrote:
>
> Well a quick n easy fix for you is you can configure you call sending peers
> to use username & secret in INVITE. As far as I know it possible in almost
> all CISCO, Avaya and all other standard Gateway and SBCs which follows full
> SIP RFCs.
>
>
>
> If you can’t do it then you need to use curl as realtime engine instead of
> MySQL. It will call a URL for each SIP request which you can handle with
> flexibility in your CGI scripts with apache. But be careful as per my
> experience asterisk 1.6 with curl as realtime engine can handle a max of 120
> registration in parallel if registration refresh time is 120 seconds.
>
>
>
> Faisal Hanif
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Ricardo Carvalho
> *Sent:* Wednesday, February 16, 2011 9:41 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] trunk not working if I register a phone at the
> same IP as the trunk peer's IP
>
>
>
> How should I configure my asterisk server so that I can receive calls from
> an unregistered peer from whom I also receive registrations of sip phones?
>
>
>
> I'm asking you this, because with my actual configuration, when I register
> a contact from that peer's IP, no more inbound calls are accepted from that
> peer, as my asterisk rejects those INVITEs with "407 Proxy Authentication
> Required", I assume because they don't carry the registered contact
> registration!!!
>
> My SIP contacts have type=friend and all inbound calls not coming from my
> registered phones fall in the default context without authentication, so
> that someone in the Internet be able to call freely through the Internet
> anyone in my server's dial plan.
>
>
>
> Some ideas?
>
>
>
> Regards,
>
> Ricardo Carvalho.
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110221/97954002/attachment.htm>
More information about the asterisk-users
mailing list