[asterisk-users] Setting two E1 cards

[Juan David Diaz]

system.conf:

span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

# Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3,crc4
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62

# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
span=3,3,0,ccs,hdb3,crc4
# termtype: te
bchan=63-77,79-93
dchan=78
echocanceller=mg2,63-77,79-93

# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
span=4,4,0,ccs,hdb3,crc4
# termtype: te
bchan=94-108,110-124
dchan=109
echocanceller=mg2,94-108,110-124

# Span 5: TE4/1/1 "T4XXP (PCI) Card 1 Span 1"
span=5,5,0,ccs,hdb3,crc4
# termtype: te
bchan=125-139,141-155
dchan=140
echocanceller=mg2,125-139,141-155

# Span 6: TE4/1/2 "T4XXP (PCI) Card 1 Span 2"
span=6,6,0,ccs,hdb3,crc4
# termtype: te
bchan=156-170,172-186
dchan=171
echocanceller=mg2,156-170,172-186

# Span 7: TE4/1/3 "T4XXP (PCI) Card 1 Span 3"
span=7,7,0,ccs,hdb3,crc4
# termtype: te
bchan=187-201,203-217
dchan=202
echocanceller=mg2,187-201,203-217

# Span 8: TE4/1/4 "T4XXP (PCI) Card 1 Span 4"
span=8,8,0,ccs,hdb3,crc4
# termtype: te
bchan=218-232,234-248
dchan=233
echocanceller=mg2,218-232,234-248

# Global data

loadzone        = us
defaultzone     = us

dahdi_channels (if included at chan_dahdi.conf):

Span 1: TE4/0/2 "T4XXP (PCI) Card 0 Span 1"
group=1
context=pri_aux_port_1
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31

; Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
group=2
context=pri_aux_port_2
switchtype = euroisdn
signalling = pri_cpe
channel => 32-46,48-62

; Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
group=3
context=pri_aux_port_3
switchtype = euroisdn
signalling = pri_cpe
channel => 63-77,79-93

; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
group=4
context=pri_aux_port_4
switchtype = euroisdn
signalling = pri_cpe
channel => 94-108,110-124

; Span 5: TE4/1/1 "T4XXP (PCI) Card 1 Span 1"
group=5
context=pri_aux_port_5
switchtype = euroisdn
signalling = pri_cpe
channel => 125-139,141-155

; Span 6: TE4/1/2 "T4XXP (PCI) Card 1 Span 2"
group=6
context=pri_aux_port_6
switchtype = euroisdn
signalling = pri_cpe
channel => 156-170,172-186

; Span 7: TE4/1/3 "T4XXP (PCI) Card 1 Span 3"
group=7
context=pri_aux_port_7
switchtype = euroisdn
signalling = pri_cpe
channel => 187-201,203-217

; Span 8: TE4/1/4 "T4XXP (PCI) Card 1 Span 4"
group=8
context=pri_aux_port_8
switchtype = euroisdn
signalling = pri_cpe
channel => 218-232,234-248


Regards!!!


Juan.
Linux User #441131


On Thu, Feb 17, 2011 at 11:46 AM, Alejandro Cabrera Obed
<aco1967 at gmail.com>wrote:

> Dear, I always had one E1 card with one span, so I've never had any
> problem in set it up through /etc/dahdi/sustem.conf and
> /etc/asterisk/chan_dahdi.conf because I put span=1.
>
> But now I have a PBX with two E1 cards with 4 span (8 span in total).
>
> How do I have to define both card in system.conf and chan_dahdi.conf,
> and how do I have to refer each span to the corresponding card ???
>
> Thanks a lot,
>
> Alejandro
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110217/2f3c60a8/attachment.htm>