[asterisk-users] YELLOW alarm
Albert
alberton at wp.pl
Mon Feb 14 05:29:00 CST 2011
On 14.02.2011 12:17, Sébastien BERGER wrote:
> As I know it's only telco who provide the clock. Then you must configure
> your span with 1,1,0
> 1 is as TE (terminal equipment)
> 0 is as NT (network termination)
>
> So, configure your span as TE, be sure telco not use crc4.
> If already yellow, call your telco and ask him if he provide clock or not.
This is what i am doing now, span in configured to obtain timiing from
telco. (span=1,1,0,ccs,hdb3)
>
> Just to be sure, verify your E1 cable. It's a crossover ?
It's out remote location so i dont have direct connection. But thanks
for hint, i will also check on that.
>
> Regards,
> Sebastien BERGER
>
> AB2L
> +33 (0)367100783
> sebastien at ab2l.eu
>
>
> Le 14/02/2011 11:50, Albert a écrit :
>> Hi,
>>
>> span 1 - e1 line (15 channels)
>> span 2 - nothing is connected to 2nd span
>>
>> below is also status from proc fs
>>
>> ps. i was also trying with timing provided by card (0)
>> span=1,1,0,ccs,hdb3
>> ...
>> but result was the same
>>
>>
>> voice:/tmp# cat /proc/dahdi/1
>> Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS YELLOW
>>
>> 1 TE2/0/1/1 Clear YELLOW(SWEC: MG2)
>> 2 TE2/0/1/2 Clear YELLOW(SWEC: MG2)
>> 3 TE2/0/1/3 Clear YELLOW(SWEC: MG2)
>> 4 TE2/0/1/4 Clear YELLOW(SWEC: MG2)
>> 5 TE2/0/1/5 Clear YELLOW(SWEC: MG2)
>> 6 TE2/0/1/6 Clear YELLOW(SWEC: MG2)
>> 7 TE2/0/1/7 Clear YELLOW(SWEC: MG2)
>> 8 TE2/0/1/8 Clear YELLOW(SWEC: MG2)
>> 9 TE2/0/1/9 Clear YELLOW(SWEC: MG2)
>> 10 TE2/0/1/10 Clear YELLOW(SWEC: MG2)
>> 11 TE2/0/1/11 Clear YELLOW(SWEC: MG2)
>> 12 TE2/0/1/12 Clear YELLOW(SWEC: MG2)
>> 13 TE2/0/1/13 Clear YELLOW(SWEC: MG2)
>> 14 TE2/0/1/14 Clear YELLOW(SWEC: MG2)
>> 15 TE2/0/1/15 Clear YELLOW(SWEC: MG2)
>> 16 TE2/0/1/16 HDLCFCS YELLOW
>> 17 TE2/0/1/17 Clear YELLOW(SWEC: MG2)
>> 18 TE2/0/1/18 Clear YELLOW(SWEC: MG2)
>> 19 TE2/0/1/19 Clear YELLOW(SWEC: MG2)
>> 20 TE2/0/1/20 Clear YELLOW(SWEC: MG2)
>> 21 TE2/0/1/21 Clear YELLOW(SWEC: MG2)
>> 22 TE2/0/1/22 Clear YELLOW(SWEC: MG2)
>> 23 TE2/0/1/23 Clear YELLOW(SWEC: MG2)
>> 24 TE2/0/1/24 Clear YELLOW(SWEC: MG2)
>> 25 TE2/0/1/25 Clear YELLOW(SWEC: MG2)
>> 26 TE2/0/1/26 Clear YELLOW(SWEC: MG2)
>> 27 TE2/0/1/27 Clear YELLOW(SWEC: MG2)
>> 28 TE2/0/1/28 Clear YELLOW(SWEC: MG2)
>> 29 TE2/0/1/29 Clear YELLOW(SWEC: MG2)
>> 30 TE2/0/1/30 Clear YELLOW(SWEC: MG2)
>> 31 TE2/0/1/31 Clear YELLOW(SWEC: MG2)
>>
>> voice:/tmp# cat /proc/dahdi/2
>> Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS RED
>>
>> 32 TE2/0/2/1 Clear RED(SWEC: MG2)
>> 33 TE2/0/2/2 Clear RED(SWEC: MG2)
>> 34 TE2/0/2/3 Clear RED(SWEC: MG2)
>> 35 TE2/0/2/4 Clear RED(SWEC: MG2)
>> 36 TE2/0/2/5 Clear RED(SWEC: MG2)
>> 37 TE2/0/2/6 Clear RED(SWEC: MG2)
>> 38 TE2/0/2/7 Clear RED(SWEC: MG2)
>> 39 TE2/0/2/8 Clear RED(SWEC: MG2)
>> 40 TE2/0/2/9 Clear RED(SWEC: MG2)
>> 41 TE2/0/2/10 Clear RED(SWEC: MG2)
>> 42 TE2/0/2/11 Clear RED(SWEC: MG2)
>> 43 TE2/0/2/12 Clear RED(SWEC: MG2)
>> 44 TE2/0/2/13 Clear RED(SWEC: MG2)
>> 45 TE2/0/2/14 Clear RED(SWEC: MG2)
>> 46 TE2/0/2/15 Clear RED(SWEC: MG2)
>> 47 TE2/0/2/16 HDLCFCS RED
>> 48 TE2/0/2/17 Clear RED(SWEC: MG2)
>> 49 TE2/0/2/18 Clear RED(SWEC: MG2)
>> 50 TE2/0/2/19 Clear RED(SWEC: MG2)
>> 51 TE2/0/2/20 Clear RED(SWEC: MG2)
>> 52 TE2/0/2/21 Clear RED(SWEC: MG2)
>> 53 TE2/0/2/22 Clear RED(SWEC: MG2)
>> 54 TE2/0/2/23 Clear RED(SWEC: MG2)
>> 55 TE2/0/2/24 Clear RED(SWEC: MG2)
>> 56 TE2/0/2/25 Clear RED(SWEC: MG2)
>> 57 TE2/0/2/26 Clear RED(SWEC: MG2)
>> 58 TE2/0/2/27 Clear RED(SWEC: MG2)
>> 59 TE2/0/2/28 Clear RED(SWEC: MG2)
>> 60 TE2/0/2/29 Clear RED(SWEC: MG2)
>> 61 TE2/0/2/30 Clear RED(SWEC: MG2)
>> 62 TE2/0/2/31 Clear RED(SWEC: MG2)
>>
>>
>>
>> Albert
>>
>> On 14.02.2011 11:39, Sébastien BERGER wrote:
>>> Hello,
>>>
>>> Can you say us what is connected in which span ?
>>>
>>> span 1 =
>>> span 2 =
>>>
>>> Yellow would say that the span did not receive external clock
>>>
>>> Sebastien
>>>
>>> AB2L
>>> +33 (0)367100783
>>> sebastien at ab2l.eu
>>>
>>>
>>> Le 14/02/2011 11:34, Albert a écrit :
>>>> Hi guys,
>>>>
>>>> I am getting YELLOW alarm on my span with E1 line. Anyone knows what
>>>> could be the problem ? Below is my config and status...
>>>>
>>>> voice:/etc/dahdi# dahdi_hardware -v
>>>> pci:0000:02:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen)
>>>>
>>>>
>>>> voice:/etc/dahdi# dahdi_scan
>>>> [1]
>>>> active=yes
>>>> alarms=YEL
>>>> description=T2XXP (PCI) Card 0 Span 1
>>>> name=TE2/0/1
>>>> manufacturer=Digium
>>>> devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
>>>> location=Board ID Switch 0
>>>> basechan=1
>>>> totchans=31
>>>> irq=16
>>>> type=digital-E1
>>>> syncsrc=0
>>>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>>> coding_opts=AMI,HDB3
>>>> framing_opts=CCS,CRC4
>>>> coding=HDB3
>>>> framing=CCS
>>>> [2]
>>>> <cut> ....</cut>
>>>>
>>>> voice:/etc/dahdi# cat system.conf
>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>>> span=1,1,0,ccs,hdb3
>>>> bchan=1-15,17-31
>>>> dchan=16
>>>> echocanceller=mg2,1-15,17-31
>>>>
>>>> # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>>>> # span=2,0,0,ccs,hdb3,crc4,yellow
>>>> span=2,0,0,ccs,hdb3
>>>> bchan=32-46,48-62
>>>> dchan=47
>>>> echocanceller=mg2,32-46,48-62
>>>>
>>>> # Global data
>>>>
>>>> loadzone = uk
>>>> defaultzone = uk
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ps1. I am using DAHDI drivers in version 2.4.0
>>>>
>>>> ps2. in attachment screen from dahdi_tool
>>>>
>>>> Any help will do.
>>>>
>>>> Thanks,
>>>> Alebert
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>> http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>> http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
More information about the asterisk-users
mailing list