[asterisk-users] Gtalk/Jabber Issue
Vladimir Mikhelson
vlad at mikhelson.com
Fri Feb 11 11:02:07 CST 2011
William,
As I understand you have to upgrade your GTalk to Google Voice to be
able to place and receive PSTN calls in Asterisk.
The easiest way is to subscribe to GMail using your GTalk credentials.
As you are in GMail try calling PSTN from there.
Then go to Google Voice / Settings / Phones and make sure GTalk phone
instance is there. Make sure GTalk lists your new gmail user name, not
the arbitrary one you may have used to create the GTalk account.
If it does not, go ahead and delete the GTalk phone instance in Phones
and log off. Then go back to GMail and initiate the call application.
Log off. Go back to Google Voice and make sure the GTalk instance lists
your GMail e-mail address.
Next step. Try to edit the GTalk phone instance in Google Voice
Settings and watch for any "pink" messages at the top of the screen when
you hit "Save." Try to resolve the issues if any.
If you made any changes to your credentials in the process make sure to
log off from all Google applications and reset your Asterisk. Also
reset Asterisk even if you did not change credentials but tweaked or
initialized the GTalk phone instance in the Google Voice Settings.
-Vladimir
>
>
> I Double checked the chat settings.
>
>
>
> For some reason jabber is not sending any outbound response packets at
> all.. not sure why. Will need to see if I can stuff some more debug
> code into res_jabber.c and figure out whats going on, debug seems limited.
>
>
>
>
>
>
>
> *From:*asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of
> *Vladimir Mikhelson
> *Sent:* Friday, February 11, 2011 1:59 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Gtalk/Jabber Issue
>
>
>
> William,
>
> Another thing. Have you tried calling from GMail? If not please make
> sure you can send/receive calls there.
>
> One more test. Go to your GV Account Settings / Phones, Edit "Google
> Chat", "Save" Watch for the pink error messages in the upper portion
> of the screen.
>
> -Vladimir
>
>
>
>
> On 2/11/2011 12:32 AM, William Stillwell wrote:
>
> Still no dice..
>
>
>
> This make no since.. ive gone over the config a million times now..
>
>
>
> The windows gtalk /voice client works just fine. (incoming and
> outgoing calls)
>
>
>
>
>
>
>
> *From:*asterisk-users-bounces at lists.digium.com
> <mailto:asterisk-users-bounces at lists.digium.com>
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of
> *Vladimir Mikhelson
> *Sent:* Friday, February 11, 2011 12:51 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Gtalk/Jabber Issue
>
>
>
> William,
>
> I have just noticed that you have several configuration statements
> commented out.
>
> I would suggest to un-comment the "status=" in jabber.conf. I would
> also suggest to un-comment the "timeout=", I am not that concerned of
> the "keepalive=".
>
> You can reload jabber, no need to restart the Asterisk.
>
> -Vladimir
>
>
>
> On 2/10/2011 11:40 PM, Vladimir Mikhelson wrote:
>
> William,
>
> Have you tried outgoing calls? What happens there?
>
> Have you restarted the Asterisk after you fixed the typo?
>
> -Vladimir
>
>
>
> On 2/10/2011 10:44 PM, William Stillwell wrote:
>
> Yeah, that was a typo, but I fixed, still no dice.
>
>
>
> The incoming jabber call doesn’t fire the gtalk connection.
>
>
>
>
>
> *From:*asterisk-users-bounces at lists.digium.com
> <mailto:asterisk-users-bounces at lists.digium.com>
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Warren
> Selby
> *Sent:* Thursday, February 10, 2011 10:16 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Gtalk/Jabber Issue
>
>
>
> You've got connection=jp_jabber defined in one file, and [jb_jabber]
> defined in the other.
>
> Thanks,
>
> --Warren Selby, dCAP
>
>
> On Feb 10, 2011, at 5:55 PM, "William Stillwell"
> <william at stillwellsoft.com <mailto:william at stillwellsoft.com>> wrote:
>
> Sorry, Asterisk Build 1.6.2.7
>
>
>
> *From:*asterisk-users-bounces at lists.digium.com
> <mailto:asterisk-users-bounces at lists.digium.com>
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of
> *William Stillwell
> *Sent:* Thursday, February 10, 2011 6:50 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* [asterisk-users] Gtalk/Jabber Issue
>
>
>
> OK, im pulling my hair out, everything looks configured right,
> deleted, and started over, etc, etc. but can’t seem to get this to
> work
>
>
>
>
>
> Gtalk.conf
>
>
>
> [general]
>
> context=google-in
>
> allowguest=yes
>
> bindaddr=192.168.xxx.xxx
>
> extenip=96.254.xxx.xxx
>
>
>
> [guest]
>
> context=google-in
>
> disallow=all
>
> allow=ulaw
>
> allow=g729
>
> connection=jp_jabber
>
>
>
> jabber.conf
>
>
>
> [general]
>
> debug=yes
>
> ;autoprune=no
>
> autoregister=yes
>
>
>
>
>
> [jb_jabber]
>
> type=client
>
> serverhost=talk.google.com
>
> username=XXXXXXXXX at gmail.com
> <mailto:username=XXXXXXXXX at gmail.com>/Talk
>
> secret=XXXXXXX
>
> port=5222
>
> usetls=yes
>
> usesasl=yes
>
> ;status=Available
>
> statusmessage="Connected via Asterisk"
>
> ;timeout=100
>
> ;keepalive=yes
>
>
>
>
>
> Extensions.conf
>
>
>
> [google-in]
>
> exten => s,1,NoOp(Call from GTalk)
>
> exten => s,n,Set(CallerID(Name)="From GoogleTalk")
>
> exten => s,n,Dial(SIP/1000)
>
>
>
> jabber show connected
>
>
>
> Jabber Users and their status:
>
> User: xxxxxx at gmail.com <mailto:xxxxxx at gmail.com>/Talk -
> Connected
>
> ----
>
> Number of users: 1
>
>
>
>
>
> ---- CLI on incoming Call ----
>
>
>
> bannana*CLI>
>
> JABBER: jb_jabber INCOMING: <iq
> from="+1*********@voice.google.com/srvres-MTAuMjE4LjE0LjEzNzo5ODU2
> <mailto:+1*********@voice.google.com/srvres-MTAuMjE4LjE0LjEzNzo5ODU2>"
> to="******@gmail.com/TalkD876FAA0
> <mailto:******@gmail.com/TalkD876FAA0>"
> id="jingle:10.218.14.137-17447266:1:03800E94"
> type="set"><ses:session type="initiate"
> id="SIP1007753261 at 10.218.122.83
> <mailto:SIP1007753261 at 10.218.122.83>"
> initiator="+1*******@voice.google.com/srvres-MTAuMjE4LjE0LjEzNzo5ODU2
> <mailto:+1*******@voice.google.com/srvres-MTAuMjE4LjE0LjEzNzo5ODU2>"
> xmlns:ses="http://www.google.com/session"><pho:description
> xmlns:pho="http://www.google.com/session/phone"><pho:payload-type
> id="0" name="PCMU" clockrate="8000"/><pho:payload-type id="101"
> name="telephone-event"/></pho:description><transport
> behind-symmetric-nat="false"
> can-receive-from-symmetric-nat="false"
> xmlns="http://www.google.com/transport/raw-udp"/><transport
> xmlns="http://www.google.com/transport/p2p"/></ses:session></iq>
>
> bannana*CLI>
>
> JABBER: jb_jabber INCOMING: <iq
> from="+1********@voice.google.com/srvres-MTAuMjE4LjE0LjEzNzo5ODU2
> <mailto:+1********@voice.google.com/srvres-MTAuMjE4LjE0LjEzNzo5ODU2>"
> to="******@gmail.com/TalkD876FAA0
> <mailto:******@gmail.com/TalkD876FAA0>"
> id="jingle:10.218.14.137-17447266:1:03800EB9"
> type="set"><ses:session type="terminate"
> id="SIP1007753261 at 10.218.122.83
> <mailto:SIP1007753261 at 10.218.122.83>"
> initiator="+1*******@voice.google.com/srvres-MTAuMjE4LjE0LjEzNzo5ODU2
> <mailto:+1*******@voice.google.com/srvres-MTAuMjE4LjE0LjEzNzo5ODU2>"
> xmlns:ses="http://www.google.com/session"><pho:call-ended
> xmlns:pho="http://www.google.com/session/phone">Call
> cancelled</pho:call-ended></ses:session></iq>
>
> bannana*CLI>
>
>
>
>
>
> it doesn’t even try to fire the google-in context ?
>
>
>
> Lastest Version of iksemel Installed, asterisk was rebuild after
> installed, asterisk sees both jabber/gtalk commands.
>
>
>
> It just will NOT ring my dialplan.
>
>
>
>
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110211/4130fff5/attachment.htm>
More information about the asterisk-users
mailing list