[asterisk-users] Question about EuroBRI final 2 digits

[Danny Nicholas]

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Christian
Gansberger
Sent: Thursday, February 10, 2011 5:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Question about EuroBRI final 2 digits

Hello,

Maybe try that:

In your incoming isdn context:
[isdn-incoming]
exten => s,1,Set(TIMEOUT(digits)=3)
exten => s,2,WaitExten(2)
exten => s,3,Dial(SIP/operator...)
exten => 10,1,Dial(SIP/10)
exten => 20,1,Dial(SIP/20)

So if a call comes in Asterisk waits, 2 seconds for further digits
dialed and if so jumps to the right extension in the context.
Overlapdial should be yes.

yours
christian gansberger
www.accm.at

On 3 February 2011 20:45, Cassius Smith <cassius at cassius.org> wrote:
> Hello,
> I have an installation in Austria; ISDN service provided by Austria
Telekom.
> The main number of the service is 6 digits. Incoming calls may contain 2
> additional digits, which I then use to route the call to the correct
> extension. Telekom sends me all the digits.
> My problem is that when someone tries to dial an 8 digit number to an
> extension from an outside analog phone, AT sends the call before they
finish
> dialing all 8 digits. Is there a way to prevent this, or to catch the
> additional 2 digits somewhere in the stream? The receptionist is unhappy
> because she gets all the 6-digit calls and must then transfer.
> Is this a p2p vs p2mp issue?
> Thanks in advance,
> Cassius Smith
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



You should be able to query the length of ${CALLERID(num)} and process the
full 8 digits that way. "Telekom sends me all the digits" tells me that the
number dialed to get to the extension arrives intact and that your dialplan
is truncating it.