[asterisk-users] Use modprobe to find E1/T1 jumper setting onPRI card

[Lee, John (Sydney)]

Thanks Shaun.
Unfortunately, I am still using zaptel.
Is there a similar command in zaptel?

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Shaun Ruffell
> Sent: Thursday, 30 September 2010 1:00 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Use modprobe to find E1/T1 jumper
setting
> onPRI card
> 
> On 09/29/2010 02:52 AM, Lee, John (Sydney) wrote:
> > Do you mean that if I could define 30 channels in span 1 for
> > example, then span 1 is set to E1?
> >
> > If not, then it is T1.
> >
> 
> You could also see this information in the "type" output from
> dahdi_scan.  For example before configuring a span:
> 
> # ./dahdi_scan
> [1]
> active=yes
> alarms=UNCONFIGURED
> description=Wildcard TE122 Card 0
> name=WCT1/0
> manufacturer=Digium
> devicetype=Wildcard TE122
> location=PCI Bus 15 Slot 05
> basechan=1
> totchans=24
> irq=90
> type=digital-T1
> syncsrc=0
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=B8ZS,AMI
> framing_opts=ESF,D4
> coding=
> framing=
> 
> 
> --
> Shaun Ruffell
> Digium, Inc. | Linux Kernel Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> Check us out at: www.digium.com & www.asterisk.org
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users