[asterisk-users] Net2Phone SIP trunk problem

[Alejandro Cabrera Obed]

Dear, I have this scenario:

- PBX Asterisk 1.6.2.10 with private IP 192.168.0.10

- Behind a Cisco ASA firewall that connects to Internet

- SIP trunk to Net2Phone with these parameters (nat=no):

host=200.58.113.60
username=DOLLY
secret=123456
port=5060
type=peer
dtmfmode=rfc2833
disallow=all
allow=alaw&ulaw
nat=no
canreinvite=no
qualify=yes

-Softphones Xlite

The PBX can't register to Net2Phone, and no calls are made and this is the
log:

-- Executing [s at macro-dialout-trunk:20] NoOp("SIP/9004-00000008", "Dial
failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 20")
in new stack
    -- Executing [s at macro-dialout-trunk:21] Goto("SIP/9004-00000008",
"s-CHANUNAVAIL,1") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
    -- Executing [s-CHANUNAVAIL at macro-dialout-trunk:1]
Set("SIP/9004-00000008", "RC=20") in new stack
    -- Executing [s-CHANUNAVAIL at macro-dialout-trunk:2]
Goto("SIP/9004-00000008", "20,1") in new stack
    -- Goto (macro-dialout-trunk,20,1)
    -- Executing [20 at macro-dialout-trunk:1] Goto("SIP/9004-00000008",
"continue,1") in new stack
    -- Goto (macro-dialout-trunk,continue,1)
    -- Executing [continue at macro-dialout-trunk:1]
GotoIf("SIP/9004-00000008", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,continue,3)
    -- Executing [continue at macro-dialout-trunk:3] NoOp("SIP/9004-00000008",
"TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 20 - failing through to
other trunks") in new stack
    -- Executing [continue at macro-dialout-trunk:4] Set("SIP/9004-00000008",
"CALLERID(number)=9004") in new stack

What can be the problem please ???

Thanks a lot

Alejandro
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100923/7b158c8b/attachment.htm