[asterisk-users] changing from zap to DAHDI

[Danny Nicholas]

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jerry Geis
Sent: Wednesday, September 15, 2010 10:06 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] changing from zap to DAHDI

I am changing a system from zap to DAHDI.
I removed everything zap. when doing the command:

sh -x /etc/init.d/dahdi start, I see

 initlog -q -c 'modprobe wct4xxp'
sh: /sbin/ztcfg: No such file or directory
FATAL: Error running install command for wct4xxp


doing updatedb then,
locate zap returns me
/var/lib/asterisk/sounds/spy-zap.gsm
/usr/share/groff/1.18.1.1/font/devps/zapfdr.pfa
/usr/lib/asterisk/modules/app_zapateller.so

locate zt return me
/lib/modules/2.6.9-42.0.3.EL/kernel/sound/pci/snd-azt3328.ko
/lib/modules/2.6.9-42.0.3.ELsmp/kernel/sound/pci/snd-azt3328.ko
/lib/modules/2.6.9-42.EL/kernel/sound/pci/snd-azt3328.ko
/lib/modules/2.6.9-42.ELsmp/kernel/sound/pci/snd-azt3328.ko
/usr/src/kernels/2.6.9-42.0.3.EL-i686/include/config/radio/aztech.h
/usr/src/kernels/2.6.9-42.0.3.EL-i686/include/config/snd/azt3328
/usr/src/kernels/2.6.9-42.0.3.EL-i686/include/config/snd/azt3328/module.h
/usr/src/kernels/2.6.9-42.0.3.EL-hugemem-i686/include/config/radio/aztech.h
/usr/src/kernels/2.6.9-42.0.3.EL-hugemem-i686/include/config/snd/azt3328
/usr/src/kernels/2.6.9-42.0.3.EL-hugemem-i686/include/config/snd/azt3328/mod
ule.h
/usr/src/kernels/2.6.9-42.EL-i686/include/config/radio/aztech.h
/usr/src/kernels/2.6.9-42.EL-i686/include/config/snd/azt3328
/usr/src/kernels/2.6.9-42.EL-i686/include/config/snd/azt3328/module.h
/usr/src/kernels/2.6.9-42.0.3.EL-smp-i686/include/config/radio/aztech.h
/usr/src/kernels/2.6.9-42.0.3.EL-smp-i686/include/config/snd/azt3328
/usr/src/kernels/2.6.9-42.0.3.EL-smp-i686/include/config/snd/azt3328/module.
h
/usr/share/terminfo/z/ztx-1-a
/usr/share/terminfo/z/ztx
/usr/share/terminfo/z/ztx11
/usr/share/terminfo/z/zt-1


So everything is gone. why is it using ztcfg?

I removed everything zap or zt then installed dahdi, I have even 
re-installed dahdi and the same is happening.
I installed: asterisk-1.4.35  asterisk-1.4.35.tar.gz  
dahdi-linux-complete-2.1.0+2.1.0  
dahdi-linux-complete-2.1.0+2.1.0.tar.gz  libpri-1.4.11.4  
libpri-1.4.11.4.tar.gz


Any thoughts?

Jerry

AIR, DAHDI "out of the box" configures modules that aren't necessarily
installed on your computer.  Check /etc/dahdi/modules and make sure only the
installed modules are active.