[asterisk-users] setting up phones

[Gopalakrishnan A.N]

Hi Ott,

 Have you made it work with Asterisk and Aastra IP Phone. I am also trying
the same thing, in Asterisk it shows registered OK but when I dial from
extension to extension, call is failed...

Please let me know have you made it work...:(

On Mon, Jul 13, 2009 at 11:46 PM, Ott Rose <sixfourimpala at hotmail.com>wrote:

>
> I did " set sip debug on " from the CLI
>
> It doesn't scroll messages like it did on Fri
>
>
> i tried 99# and the screen on the phone changed to an ip of 10.0.0.99 which
> isn't either one of the ips of the asterisk server. then it hung up
>
> i do have a dial tone
>
>
> i just figured something out after reading my post.
>
>
> if i dial 60# it shows the ip 10.0.0.60 of the other phone then switch to
> the extension and the other phone rings.
>
> still can't get the 99 to call the asterisk server to work i put in the ips
> of the server but it hangs up right away
>
> ------------------------------
> From: danny at debsinc.com
> To: asterisk-users at lists.digium.com
> Date: Mon, 13 Jul 2009 12:57:59 -0500
>
> Subject: Re: [asterisk-users] setting up phones
>
>  I assume you get a dial tone when you pick up the handset?    If you had
> a good phone-to-asterisk connection, debug would show a connection or
> rejection when you did 99#.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Ott Rose
> *Sent:* Monday, July 13, 2009 12:49 PM
> *To:* asterisk-users at lists.digium.com
> *Subject:* Re: [asterisk-users] setting up phones
>
>
>
> added that line to the extensions.conf file because i could find a way to
> add it in the GUI. I put it under the dial plan that i have selected. i just
> get a busy signal i tried #99 just 99, *99 nothing works. debugging isnt
> showing anything.
>  ------------------------------
>
> From: danny at debsinc.com
> To: asterisk-users at lists.digium.com
> Date: Mon, 13 Jul 2009 12:12:16 -0500
> Subject: Re: [asterisk-users] setting up phones
>
> Most folks (AFAIK) use TFTP to connect to the Asterisk server.  I
> personally use HTTP, but that took a few days of research to figure out.
> You’re really only using that protocol for configuration and log transfers.
> The actual lifting is done on a TCP or UDP connection.  Your posts Friday
> indicated that Asterisk was up and “functional” but that you couldn’t make
> your phones talk to it.  I’m thinking that instead of trying to dial
> phone-to-phone, that you should first make one phone talk to asterisk using
> this little snippet.
>
>
>
> -          exten => 99,1,Playback(tt-monkeys)
>
> -          exten => 99,2,Playback(vm-goodbye)
>
> -          exten => 99,3,hangup
>
>
>
> When you get your phone where it can dial 99 and get a message, you will be
> ready to proceed with P2P talking.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Ott Rose
> *Sent:* Monday, July 13, 2009 12:02 PM
> *To:* asterisk-users at lists.digium.com
> *Subject:* Re: [asterisk-users] setting up phones
>
>
>
> Ok here is what i did.
>
> reinstalled asterisk (i used the make samples option) and asterisk-gui
>
> in the gui i did the following
>  created a dial plans using the defaults. no outgoing dial plans just local
>  crated two users
>  logged into the web interface with each phone and pointed them to our
> asterisk server. Just the Proxy server and Registrar server.
>
>  Still doesn't work. Should i be able to use the configuration server
> settings form the phones web gui. it has the options for tftp, ftp, http,
> https. I don't know how this is supposed to be configured. I still don't
> know what the problem is and sip set debug off does display any info like it
> was lastweek.
>
>
> I am just trying to use the gui like you suggestd
>
> > Date: Fri, 10 Jul 2009 14:22:25 -0700
> > From: asterisk.org at sedwards.com
> > To: asterisk-users at lists.digium.com
> > Subject: Re: [asterisk-users] setting up phones
> >
> > On Fri, 10 Jul 2009, Ott Rose wrote:
> >
> > > I don't think the GUI is editing the conf files correctly. I am not
> sure
> > > I have configure things right. At this point i think i am going to
> start
> > > from scratch.
> >
> > Yea!
> > --
> > Thanks in advance,
> > -------------------------------------------------------------------------
> > Steve Edwards sedwards at sedwards.com Voice: +1-760-468-3867 PST
> > Newline Fax: +1-760-731-3000
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>  ------------------------------
>
> Windows Live™ Hotmail®: Spread the word when you add celeb photos to your
> e-mails. Check it out.<http://www.windowslive.com/Online/Hotmail/Campaign/QuickAdd?ocid=TXT_TAGLM_WL_QA_HM_celebrity_photos1_072009&cat=celebrity>
>
>
>  ------------------------------
>
> Bing™ brings you health information from trusted sources. Try it now.<http://www.bing.com/search?q=pet+allergy&form=MHEINA&publ=WLHMTAG&crea=TXT_MHEINA_Health_Health_PetAllergy_1x1>
>
> ------------------------------
> Bing™ brings you health information from trusted sources. Try it now.<http://www.bing.com/search?q=pet+allergy&form=MHEINA&publ=WLHMTAG&crea=TXT_MHEINA_Health_Health_PetAllergy_1x1>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Thank you  with regards,
Gopalakrishnan A.N,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100915/dffbc4d5/attachment.htm