[asterisk-users] not succeeding to hide callerid with outbound calls

Joost Kuif | Mobillion Joost.kuif at mobillion.nl
Tue Sep 7 05:42:51 CDT 2010 

Hi,

I am replying on my previous post from last friday.
My pri debugging gives me other statuses as seen at the asterisk application layer!
In logging below i set the CALLERPRES()=prohib in the dialplan.

When the PRI is used for dialing out the followig is logged:
> Calling Number (len=13) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>                           Presentation: Presentation permitted, user number passed network screening (1)  '30300****' ]

Is this a bug? Can anyone give me some feedback on this issue?

Thanks,
Joost

    -- Executing [s at nextnode:6] Macro("SIP/joostkuif-00000014", "transfer") in new stack
    -- Executing [s at macro-transfer:1] NoOp("SIP/joostkuif-00000014", "macro-transfer") in new stack
    -- Executing [s at macro-transfer:2] NoOp("SIP/joostkuif-00000014", "inbTransfer_phoneNumber               = 003164616****") in new stack
    -- Executing [s at macro-transfer:3] NoOp("SIP/joostkuif-00000014", "inbTransfer_ringTime                  = 10") in new stack
    -- Executing [s at macro-transfer:4] NoOp("SIP/joostkuif-00000014", "inbTransfer_presentationNumber_type   = CUSTOM") in new stack
    -- Executing [s at macro-transfer:5] NoOp("SIP/joostkuif-00000014", "inbTransfer_presentationNumber_custom = 30300****") in new stack
    -- Executing [s at macro-transfer:6] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdBusy                     = 3") in new stack
    -- Executing [s at macro-transfer:7] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdNoAnswer                 = 3") in new stack
    -- Executing [s at macro-transfer:8] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdUnknownNumber            = 3") in new stack
    -- Executing [s at macro-transfer:9] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdNoResources              = 3") in new stack
    -- Executing [s at macro-transfer:10] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdErrorFastRepeat          = 3") in new stack
    -- Executing [s at macro-transfer:11] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdErrorSlowRepeat          = 3") in new stack
    -- Executing [s at macro-transfer:12] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdErrorFatal               = 3") in new stack
    -- Executing [s at macro-transfer:13] NoOp("SIP/joostkuif-00000014", "inbNodeType                           = transfer") in new stack
    -- Executing [s at macro-transfer:14] GotoIf("SIP/joostkuif-00000014", "0?none") in new stack
    -- Executing [s at macro-transfer:15] GotoIf("SIP/joostkuif-00000014", "0?callercli") in new stack
    -- Executing [s at macro-transfer:16] GotoIf("SIP/joostkuif-00000014", "6?custom") in new stack
    -- Goto (macro-transfer,s,32)
    -- Executing [s at macro-transfer:32] NoOp("SIP/joostkuif-00000014", "custom") in new stack
    -- Executing [s at macro-transfer:33] NoOp("SIP/joostkuif-00000014", "inbTransfer_presentationNumber_custom = 30300****") in new stack
    -- Executing [s at macro-transfer:34] Set("SIP/joostkuif-00000014", "CALLERID(num)=30300****") in new stack
    -- Executing [s at macro-transfer:35] Goto("SIP/joostkuif-00000014", "geheim") in new stack
    -- Goto (macro-transfer,s,25)
    -- Executing [s at macro-transfer:25] NoOp("SIP/joostkuif-00000014", "geheim") in new stack
    -- Executing [s at macro-transfer:26] NoOp("SIP/joostkuif-00000014", "voor de SET CALLERPRES() = allowed_not_screened") in new stack
    -- Executing [s at macro-transfer:27] NoOp("SIP/joostkuif-00000014", "CALLINGPRES = 0") in new stack
    -- Executing [s at macro-transfer:28] Set("SIP/joostkuif-00000014", "CALLERPRES()=prohib") in new stack
    -- Executing [s at macro-transfer:29] NoOp("SIP/joostkuif-00000014", "na de SET CALLERPRES() = prohib") in new stack
    -- Executing [s at macro-transfer:30] NoOp("SIP/joostkuif-00000014", "CALLINGPRES is nu = 35") in new stack
    -- Executing [s at macro-transfer:31] Goto("SIP/joostkuif-00000014", "dial") in new stack
    -- Goto (macro-transfer,s,36)
    -- Executing [s at macro-transfer:36] NoOp("SIP/joostkuif-00000014", "dial") in new stack
    -- Executing [s at macro-transfer:37] Dial("SIP/joostkuif-00000014", "DAHDI/g1/003164616****,10") in new stack
-- Making new call for cref 32803
    -- Requested transfer capability: 0x00 - SPEECH
> Protocol Discriminator: Q.931 (8)  len=45
> TEI=0 Call Ref: len= 2 (reference 35/0x23) (Sent from originator)
> Message Type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
>                                User information layer 1: A-Law (35)
> [18 03 a1 83 81]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  Preferred  Dchan: 0
>                       ChanSel: As indicated in following octets
>                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
>                       Ext: 1  Channel: 1 Type: CPE]
> [6c 0b 21 81 33 30 33 30 30 3* 3* 3* 3*]
> Calling Number (len=13) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>                           Presentation: Presentation permitted, user number passed network screening (1)  '30300****' ]
> [70 0e 80 30 30 33 31 36 34 36 31 36 3* 3* 3* 3*]
> Called Number (len=16) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0)  '003164616****' ]
> [a1]
> Sending Complete (len= 1)
q931.c:4877 q931_setup: Call 32803 enters state 1 (Call Initiated).  Hold state: Idle
    -- Called g1/003164616****
< Protocol Discriminator: Q.931 (8)  len=10
< TEI=0 Call Ref: len= 2 (reference 35/0x23) (Sent to originator)
< Message Type: CALL PROCEEDING (2)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  Exclusive  Dchan: 0
<                       ChanSel: As indicated in following octets
<                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
<                       Ext: 1  Channel: 1 Type: CPE]
Received message for call 0x6b0f420 on 0x2aaaac07fd20 TEI/SAPI 0/0, call->pri is 0x2aaaac07fd20 TEI/SAPI 0/0
-- Processing IE 24 (cs0, Channel Identification)
q931.c:6916 post_handle_q931_message: Call 32803 enters state 3 (Outgoing Call Proceeding).  Hold state: Idle
    -- DAHDI/1-1 is proceeding passing it to SIP/joostkuif-00000014
< Protocol Discriminator: Q.931 (8)  len=9
< TEI=0 Call Ref: len= 2 (reference 35/0x23) (Sent to originator)
< Message Type: ALERTING (1)
< [1e 02 84 88]
< Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  0: 0  Location: Public network serving the remote user (4)
<                               Ext: 1  Progress Description: Inband information or appropriate pattern now available. (8) ]
Received message for call 0x6b0f420 on 0x2aaaac07fd20 TEI/SAPI 0/0, call->pri is 0x2aaaac07fd20 TEI/SAPI 0/0
-- Processing IE 30 (cs0, Progress Indicator)
q931.c:6806 post_handle_q931_message: Call 32803 enters state 4 (Call Delivered).  Hold state: Idle
    -- DAHDI/1-1 is ringing




________________________________________
From: asterisk-users-bounces at lists.digium.com [asterisk-users-bounces at lists.digium.com] On Behalf Of Joost Kuif | Mobillion
Sent: Friday, September 03, 2010 10:14 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] not succeeding to hide callerid with outbound calls - Email found in subject

Hi All,

In my dialplan and standard asterisk CLI logging i see that i am able to restrict the callerid when dialing out with asterisk.
however, on the receiving phone, the callerid is still displayed.

When i increment the logging of the pri with "pri set debug on span 1" on the CLI i also get the lower level debugging info from the pri.

More information about the asterisk-users mailing list