[asterisk-users] B410P - BRI NT 100 Ohm terminator

[Olivier]

2010/10/25 Shaun Ruffell <sruffell at digium.com>

> On 10/23/2010 07:07 AM, Olivier wrote:
> > Hi,
> >
> > My set up is :
> > Asterisk with B410P in NT mode  <-------------cat5 straight cable
> > ----------------> Another PBX in TE mode
> >
> > Is the 100 Ohm terminator you can find on B410P boards, necessary when
> > connecting in NT mode to another PBX (set in TE mode) ?
> >
>
> If you have it set up in a point-to-point mode, you do not need the
> termination.  It is required when you are daisy chaining devices (like
> when using point-to-multipoint i.e. you are connecting several ISDN
> phones to one B410P in NT mode).
>

OK ! Thanks : I forgot about this point-to-multipoint situation as I've
still never met it anywhere.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101025/b052fd0d/attachment.htm