[asterisk-users] DIALSTATUS always returns NOANSWER

[Godson Gera]

Hi,

Which asterisk version are you using. try setting call-limit value in
sip.conf and see if it makes any difference.




On Thu, Oct 21, 2010 at 1:29 PM, GBR Icasiano, Ryan A. <
raicasiano at globalbridgeresources.com> wrote:

> Hi,
>
> Here is the scenario:
> 1. 1st phone calls and asterisk dials to extension no.
> 2. Extension answers 1st caller(which makes it busy).
> 2. 2nd phone calls and asterisk dials to extension no.
> 3. 2nd phone hears a BUSY tone, but have to wait for the timeout to
> expire(in DIAL cmd) before proceeding to the next step in dialplan
> 4. Get the current DIALSTATUS, but it returns NOANSWER, instead of BUSY
>
> the problem is, since the 2nd caller hears a busy tone, it should not wait
> for the timeout to expire, and proceed immediately in fetching the
> DIALSTATUS.
> I also tried this scenario and used DEV_STATE, but it always returns
> NOT_INUSE
>
> I already assigned qualify=yes in my sip configuration but still to no
> avail.
>
> any ideas?
>
> regards,
>
> RYAN ICASIANO
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Thanks & Regards,
Godson Gera
FreeSWITCH Asterisk Billing
Consultant<http://blog.godson.in/2010/10/asterisk-vs-freeswitch-channel-tracking.html>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101021/70a57ff4/attachment.htm