[asterisk-users] How to connect asterisk PBX to PSTN

[Danny Nicholas]

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jigar Joshi
Sent: Tuesday, October 19, 2010 1:28 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] How to connect asterisk PBX to PSTN

 

 

I will have a closer look at this book

 

My Question is :

 

Is it possible with asterisk to resolve all the code to one extension and
with the extension no.

 

For example person one calls it and enters code 1

person two calls and enters code 2  

 

both the call should received by a single extension say 1001.

and there I should be able to differenciate both the calls using code
entered.

 

in the example: both the call will be given to extension 1001 and at 1001
there will be an app running that will make this into two calls.i mean each
packet contains the code entered.

 

I hope this answer would be helpful .

 

Thanks.

<snip>

#1. Steve (as usual) is correct

#2. We eat this kind of "simple dialplanning" for lunch

#3.  After you read the book, ask it again if needed

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101019/876937f3/attachment.htm