[asterisk-users] Registering Multiple Trunks to Service Provider

[Ujjval Karihaloo]

Any pointers on this one?

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ujjval Karihaloo
Sent: Monday, October 04, 2010 12:33 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Registering Multiple Trunks to Service Provider

We have multiple entries like the one below in our users.conf file... where the username. Contact and secret changes for different customers and we register on their behalf to the Service Provider.

For the trunk below: when the call is placed out, Asterisk (1.4.18) sends the username of "abc.com" in the MD5 Auth .....which obviously does not match the trunk setup for this Customer with our Service Provider (username below is 3035551122)

I don't see anywhere any config file the username = abc.com ....where could the asterisk be picking it up from?

We have more than 10 such entries (all with same host = provider.sip.com value) and when as INVITE is challenged, the Asterisk does match the correct trunk and seems to send out correct Auth credentials...but not the one below..

[trunk_1]
;register to SP
allow = ulaw
;context = test
dialformat = ${EXTEN:1}
canreinvite = no
hasexten = no
hasiax = no
hassip = yes
host = provider.sip.com
insecure = very
port = 5060
registeriax = no
registersip = yes
trunkname = test
trunkstyle = customvoip
username = 3035551122
disallow = gsm,g726,alaw
contact = 3035551122
secret = xxxxx

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101005/eb2aaae0/attachment.htm