[asterisk-users] No translator path exists for channel type DAHDI (native 76) to 256

[John Novack]

Danny Dias wrote:
> Hello,
>
> We are having issues with a NEW Sangoma A108D:
>
>     -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0", 
> "DAHDI/g0/691918892|30|m") in new stack
> [Oct  1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No 
> translator path exists for channel type DAHDI (native 76) to 256
> [Oct  1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: 
> Unable to create channel of type 'DAHDI' (cause 58 - Bearer capability 
> not available)
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Executing [691918892 at pbx1:2] Hangup("SIP/xtravoip200-009d24b0", 
> "") in new stack
>   == Spawn extension (pbx1, 691918892, 2) exited non-zero on 
> 'SIP/xtravoip200-009d24b0'
>
> wanrouter status:
>
> wanrouter status
>
> Devices currently active:
>     wanpipe1 wanpipe2 wanpipe3 wanpipe4 wanpipe5 wanpipe6 wanpipe7 
> wanpipe8
>
>
> Wanpipe Config:
>
> Device name | Protocol Map | Adapter  | IRQ | Slot/IO | If's | CLK | 
> Baud rate |
> wanpipe1    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 
> 1    | N/A | 0         |
> wanpipe2    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 
> 1    | N/A | 0         |
> wanpipe3    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 
> 1    | N/A | 0         |
> wanpipe4    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 
> 1    | N/A | 0         |
> wanpipe5    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 
> 1    | N/A | 0         |
> wanpipe6    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 
> 1    | N/A | 0         |
> wanpipe7    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 
> 1    | N/A | 0         |
> wanpipe8    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 
> 1    | N/A | 0         |
>
> Wanrouter Status:
>
> Device name | Protocol | Station | Status        |
> wanpipe1    | AFT TE1  | N/A     | Connected     |
> wanpipe2    | AFT TE1  | N/A     | Disconnected  |
> wanpipe3    | AFT TE1  | N/A     | Disconnected  |
> wanpipe4    | AFT TE1  | N/A     | Disconnected  |
> wanpipe5    | AFT TE1  | N/A     | Disconnected  |
> wanpipe6    | AFT TE1  | N/A     | Disconnected  |
> wanpipe7    | AFT TE1  | N/A     | Disconnected  |
> wanpipe8    | AFT TE1  | N/A     | Disconnected  |
>
> root at Sangoma-Testing:/etc/asterisk# wanpipemon -i w1g1 -c Ta
>
> ***** w1g1: E1 Alarms (Framer) *****
>
> ALOS:    OFF    | LOS:    OFF
> RED:    OFF    | AIS:    OFF
> OOF:    OFF    | RAI:    OFF
>
> ***** w1g1: E1 Alarms (LIU) *****
>
> Short Circuit:    OFF
> Open Circuit:    OFF
> Loss of Signal:    OFF
>
>
> ***** w1g1: E1 Performance Monitoring Counters *****
>
> Line Code Violation    : 187
> Far End Block Errors    : 0
> CRC4 Errors        : 0
> FAS Errors        : 0
>
>
> Rx Level    : > -2.5db
>
>
> root at Sangoma-Testing:/etc/asterisk# asterisk -rx 'pri show spans'
> PRI span 1/0: Provisioned, Up, Active
> PRI span 2/0: Provisioned, In Alarm, Down, Active
> PRI span 3/0: Provisioned, In Alarm, Down, Active
> PRI span 4/0: Provisioned, In Alarm, Down, Active
> PRI span 5/0: Provisioned, In Alarm, Down, Active
> PRI span 6/0: Provisioned, In Alarm, Down, Active
> PRI span 7/0: Provisioned, In Alarm, Down, Active
> PRI span 8/0: Provisioned, In Alarm, Down, Active
>
> What's happening?
>
> Hope you can help me
>
> Regards! 
Have you contacted Sangoma?

They provide EXCELLENT support, and should be contacted first

John Novack

-- 

Dog is my Co-pilot