[asterisk-users] Phones slow to ring

[Mark Phillips]

I would second that.

If you don't set a dial string in your handset then it waits for N 
seconds before submitting the call. Pressing # will force an immediate dial.

Mark

On 11/04/2010 07:19 PM, Cary Fitch wrote:
> Watch the console as you dial.  Dial the number and “#”.  The ring
> should be “instant”. Or if not, look at the console and report what you see.
>
> Cary Fitch
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *jy
> *Sent:* Thursday, November 04, 2010 5:32 PM
> *To:* asterisk-users at lists.digium.com
> *Subject:* [asterisk-users] Phones slow to ring
>
> I am new to asterisk and using it for a research project. Have set up an
> server (version 1.6.2.6) and 2 SIP phones (Linksys spa901) which are
> registering fine with the server. They are able to call one another,
> however, the problem is it takes roughly 8-10 seconds for the called
> phone to ring. I have a really simple dialplan using only 4 digit
> extensions and have turned off callerid. Both phones are on the same
> subnet and I have enabled nat and keepalive.
>
> Does anyone have an idea what could be wrong here or idea on how to
> debug this problem?
>
> Thanks,
> John
>

-- 


/\/\ark Phillips