[asterisk-users] Force direct RTP

[Harel Cohen]

Hi All,
Is it possible to force direct RTP between two endpoints, even if they are known to be behind NAT (e.g. when the NAT firewall at the end is statically opened for the relevant ports)?
Thanks,
Harel

________________________________
This electronic message and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee you should not disseminate or distribute a copy of this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete.
Warning: Although the company has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.

EasyCall Ltd
11 Cornwall's Parade
P.O.Box 1488
Gibraltar.
Office : +350 20077889
Fax : +350 20076727.
www.easycall.gi
support at easycall.gi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101101/47ded5b2/attachment.htm