[asterisk-users] [Dahdi] "DAHDI_CHANCONFIG failed on channel 1"?

[Gilles]

On Sun, 30 May 2010 02:45:51 +0300, Tzafrir Cohen
<tzafrir.cohen at xorcom.com> wrote:
>> This is a bug of the netjet module. It should not try to handle those
>> devices. While they use the netjet chipset, they are not the ISDN BRI
>> devices drivven by it.
>
>[Snip details]
>
>> If nobody beats me to it, I'll try submitting a (untested) extended list
>> of exceptions over the weekend.
>
>Submitted:
>
>http://marc.info/?l=linux-netdev&m=127517632426217&w=2
>
>That said, I believe it would help if we also had explicit sub product
>IDs to exclude, rather than just exclude by sub vendor ID.
>
>The sub-product ID is listed in e.g. the output of lspci -v:
>
>(I use -s below to get just a single device this time)
>
>tzafrir at sweetmorn:~$ lspci -s 0c:00.0 -vn
>0c:00.0 0280: 8086:4229 (rev 61)
>        Subsystem: 8086:1121
>        Flags: bus master, fast devsel, latency 0, IRQ 27
>        Memory at fe8fe000 (64-bit, non-prefetchable) [size=8K]
>        Capabilities: <access denied>
>        Kernel driver in use: iwlagn
>
>tzafrir at sweetmorn:~$ lspci -s 0c:00.0 -vnn
>0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965
>AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
>        Subsystem: Intel Corporation Device [8086:1121]
>        Flags: bus master, fast devsel, latency 0, IRQ 27
>        Memory at fe8fe000 (64-bit, non-prefetchable) [size=8K]
>        Capabilities: <access denied>
>        Kernel driver in use: iwlagn
>
>The "Subsystem" line has <sub-vendor-ID>:<sub-product-ID>. Thus for this
>device the sub-product ID is 1121.

FWIW, here's the output of "lspci -vv" on an OpenVox A400P with a
single FXO module:

======
03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
        Subsystem: Device b100:0003
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (250ns min, 32000ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: I/O ports at a000 [size=256]
        Region 1: Memory at e2000000 (32-bit, non-prefetchable)
[size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: wctdm
        Kernel modules: wctdm, hisax, netjet
======

HTH,