[asterisk-users] Implementing Asterisk on a WAN or an Intranet

[Goke M Aruna]

Ay,

Run make sample in the asterisk src dir3. And check the etc asterisk
dir3 for sample config files.

If you are not clear after reading contact me goksie at gmail.

Thanks

On 5/30/10, ayodele abejide <ayodeleabejide at hotmail.com> wrote:
> Hi everyone,
>
> I want to Implement asterisk on my company's intranet comprising of 100
> local area networks I don't know how to configure my dialplan and my
> sip.conf files
>
>
> Thanks
>
> Date: Sun, 30 May 2010 10:06:12 -0400
> From: venefax at gmail.com
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] How to use one single IP as origination
>
> I have an Asterisk with multiple IP's, on the same subnet. When a call comes
> in, I need to send it back out via SIP, but need that only one IP is used as
> originating IP for all calls.
> For example
> machines has
>
> 192.168.50.3
> 192.168.50.4
> 192.168.50.5
> ....
> but when I originate the second leg of a call,  the IP address that is
> supposed to be read as source IP must be 192.168.50.5, regardless of how the
> call arrived.
>
>
> How do I do that?
>
>
>
>  		 	   		
> _________________________________________________________________
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
> https://signup.live.com/signup.aspx?id=60969

-- 
Sent from my mobile device