[asterisk-users] convert zaptel to dahdi?

[Danny Nicholas]

You did a dahdi_cfg -vv to see that the channels are up?

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Carlos Chavez
Sent: Monday, May 24, 2010 4:05 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] convert zaptel to dahdi?

On Mon, 2010-05-24 at 16:56 -0400, Michael Munger wrote:
> I am trying to get a zaptel install converted to dahdi.
> 
> I can get dahdi installed, and the pseudo device even shows up; however,
dahdi show channels shows me nothing. There is a TE122 and a TDM800 in
there, and neither show up.
> 
> dahdi show status shows both cards, and dahdi tools show that the cards
are there, working, and have no alarms.
> 
> What am I missing?
> 
	The main problem I have found while doing this upgrade is that you
need
to erase all zaptel related modules and applications and then reboot.

	Did you recompile Asterisk after installing DAHDI?

-- 
Telecomunicaciones Abiertas de México S.A. de C.V.
Carlos Chávez Prats
Director de Tecnología
+52-55-91169161 ext 2001