[asterisk-users] About Sangoma cards and Asterisk integration with other PBX

[Daniel Bareiro]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi all!

I had the opportunity to test a Sangoma A200 card and I have some doubts
that I would like to consult:

I tried to detect the card and I had no success using the wctdm module
with DAHDI. I guess this is because electronics is different because the
TDM400P and OpenVox A400P cards have separate modules for each channel,
while the Sangoma A200 each module operates two channels. I had to
compile Wanpipe for the card was detected. Is it the only way?

Another thing I want to try is to connect Asterisk with Siemens PBX so
that the extensions on Asterisk can communicate with the extensions on
the Siemens PBX and vice versa. For this should I connect a FXO channel
on Asterisk with a FXS channel of Siemens PBX?

I noticed that, unlike OpenVox A400P card, RJ connectors on the Sangoma
A200 card are smaller. Apparently, the OpenVox use standard telephone
connectors.

Thanks in advance for your replies.

Regards,
Daniel

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkv3NNIACgkQZpa/GxTmHTdwTQCfaVv5FZc3T33++JaiVAkgnITs
vzYAnicGq+ItJH1tLYf0xMuX/peJjQxe
=WVug
-----END PGP SIGNATURE-----