[asterisk-users] SPA-932 BLF Stays solid red for singleextension

[Steve Anness]

Thanks guys -- it was a call that was hung I did a soft hangup and it
fixed the problem.

Going to set-up that cron job for restarting the service at midnight
as there is no one in the office that late/early.

Thank You,

Steve Anness

On Fri, May 21, 2010 at 10:49 AM, Danny Nicholas <danny at debsinc.com> wrote:
> Assuming that you don’t have “around the clock” phone traffic, it’s a “good
> idea” (IMO) to cron a “restart when convenient” at about midnight local time
> each day.
>
>
>
> ________________________________
>
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Warren Selby
> Sent: Friday, May 21, 2010 10:43 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] SPA-932 BLF Stays solid red for
> singleextension
>
>
>
> On Fri, May 21, 2010 at 10:11 AM, Danny Nicholas <danny at debsinc.com> wrote:
>
> Try core show hints from CLI - since BLF is hint-driven (As best as I know),
> you may have a "lagging hint".
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
>
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Anness
> Sent: Friday, May 21, 2010 9:58 AM
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] SPA-932 BLF Stays solid red for single extension
>
> The receptionist at one of our offices called today to stay that there
> is an extension on the SPA-932 console that has been solid red for a
> few days now.  He has restarted the console and we restarted the phone
> in question.  Still the light stays solid red despite the fact that
> there are no calls in progress.  Since this isn't happening on any
> other extension I am not sure what to look at.  Does anyone have any
> advice on what might be causing this and where the first place I need
> to look is?
>
> Thank You,
>
> --
> Steve Anness
>
>
> I've seen this sometimes and the quick and dirty solution was to restart
> asterisk.  Check "core show channels" and see if there are any 'hung'
> channels.
>
> --
> Thanks,
> --Warren Selby
> http://www.selbytech.com
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Steve Anness