[asterisk-users] Sip session timers.
Leonardo Pistone
l.pistone at sispac.it
Thu May 13 11:12:54 CDT 2010
Dear all,
I have a question about session timers. I have one of my installations
(* 1.6.2.7) where all SIP calls get stuck, like this:
cs4wall*CLI> sip show channels
Peer User/ANR Call ID Format Hold
Last Message Expiry
192.168.40.178 42 3c291b87c66e-sl 0x8 (alaw) No
Rx: BYE
192.168.40.179 41 3c29160969a5-3o 0x8 (alaw) No
Rx: BYE
192.168.40.101 34xxxxxxxx 35e52e9a70318d2 0x8 (alaw) No
Rx: BYE
192.168.40.179 41 249be1a944ffaad 0x8 (alaw) Yes
Rx: BYE Done
192.168.40.179 41 474d9912211df31 0x8 (alaw) No
Rx: BYE
192.168.40.101 patton-quartu 460edaf8a643fea 0x8 (alaw) No
Tx: ACK
192.168.40.178 42 3b6b87342aa1299 0x8 (alaw) No
Rx: BYE
192.168.40.179 41 613596f5278d8bc 0x8 (alaw) Yes
Rx: BYE Done
192.168.40.101 patton-quartu 7dc4ff993231df7 0x8 (alaw) No
Rx: BYE
192.168.40.178 42 3c291834ab92-x9 0x8 (alaw) No
Rx: BYE
192.168.40.178 42 26c6c35f5659fe8 0x8 (alaw) No
Tx: ACK
11 active SIP dialogs
Strange thing is, I enabled sip session timers=originate, and
rtptimeout, but this doesn't seem to do anything.
I noticed that a "sip show channel xxx" while the call is actually up says:
> Session-Timer: Active
> S-Timer Interval: 1800
> S-Timer Refresher: uac
> S-Timer Expirys: 0
> S-Timer Sched Id: 2267
> S-Timer Peer Sts: Active
> S-Timer Cached Min-SE: 90
> S-Timer Cached SE: 1800
> S-Timer Cached Ref: auto
> S-Timer Cached Mode: Originate
A few seconds later, when the phone actually hung up, for the same sip
channel I get:
> Session-Timer: Inactive
This seems strange to me. Any ideas?
Thanks a lot.
Leo
--
Leonardo Pistone
SISPAC
Tel. 0114540111, Fax 0114540160
More information about the asterisk-users
mailing list