[asterisk-users] JNET's qozap, dahdi and PCI-E Quad

[Olivier]

2010/5/8 Olivier <oza_4h07 at yahoo.fr>

> Hi,
>
> I'm trying to dial from one Asterisk box to a Patton 4638 BRI gateway.
> I'm only getting this :
> [May  8 15:08:24] WARNING[16797]: app_dial.c:1547 dial_exec_full: Unable to
> create channel of type 'DAHDI' (cause 0 - Unknown)
>
> My setup is :
> Asterisk 1.6.1.18
> libpri 1.4.10.2
> 1 Junghanns QuadBRI PCI-E express with :
> - driver
> http://webservices.jnetdns.de/~junghanns.net/downloads/jnet-dahdi-drivers-1.0.1.tar.gz<http://webservices.jnetdns.de/%7Ejunghanns.net/downloads/jnet-dahdi-drivers-1.0.1.tar.gz>
> - every jumper set to TE mode
>
>
> When typing "pri show spans", Asterisk replies nothing :
> brs-dev*CLI> pri show spans
> brs-dev*CLI> pri show version
> libpri version: 1.4.10.2
> brs-dev*CLI> dahdi show version
> DAHDI Version: 2.3.0 Echo Canceller: KB1
>
> Each LED is green but dahdi_scan says :
> # dahdi_scan
> [1]
> active=yes
> alarms=OK
> description=quadBRI PCI ISDN Card 1 Span 1 [TE] (ca
> name=ztqoz/1/1
> manufacturer=
> devicetype=
> location=
> basechan=1
> totchans=3
> irq=0
> type=digital-
> syncsrc=0
> lbo=399-533 feet (DSX-1)
> coding_opts=AMI
> framing_opts=CCS
> coding=AMI
> framing=CCS
>
>
> 1. Is this syncsrc=0 normal (we're in TE mode) ?
> 2. Am I correct to hope "pri show spans" to display something ?
> 3. Suggestions ?
>
> Regards
>
> I should have said I've tried unsuccessfully with both dahdi 2.2.1.1 and
2.3.
I'm really wondering if PCI-E QuadBRI are supported.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100508/b8e2dade/attachment.htm