[asterisk-users] Hash Dial Pattern Problems

[Danny Nicholas]

Ok.  I'm confused.  I was interpreting what you wrote to say that you are
doing this:

1.	pick up sip phone attached to pbx1 (1.2 box)
2.	dial #5551212
3.	command dial(iax2/trunk/5551212,30,r) gets executed on 1.2 box 
4.	1.4 box should fall into _XXXXXXX and do DAHDI dial?

 

If this is correct, where is the IAX command in your CLI output.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Nickel
Sent: Wednesday, May 05, 2010 10:11 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Hash Dial Pattern Problems

 

I am on the 1.2 box and see nothing with the verbose cranked up. I do see
the following when tailing the asterisk full log during the calls:

May  5 11:09:46 DEBUG[26538] chan_sip.c: Setting NAT on RTP to 0

May  5 11:09:46 DEBUG[26538] chan_sip.c: Checking SIP call limits for device
3000

May  5 11:09:46 DEBUG[26538] chan_sip.c: Stopping retransmission on
'Njg3MjI5N2IzNDk3NWYxZTMzMzFmMzEwNzc2ZDE1NTE.' of Response 2: Match Found

 

 

On Wed, May 5, 2010 at 10:39 AM, Danny Nicholas <danny at debsinc.com> wrote:

Ok - you have to be getting something or you wouldn't get that message.  You
are looking at CLI on the 1.2 or 1.4 box? If you're looking at the 1.4 side,
you won't see anything until a connection is made (although you should see
some kind of credential reject or something??)

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Nickel
Sent: Wednesday, May 05, 2010 9:31 AM


To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Hash Dial Pattern Problems

 

Nothing..goes directly to "The person you are calling is unavailable". 

On Wed, May 5, 2010 at 9:46 AM, Danny Nicholas <danny at debsinc.com> wrote:

Set verbose to 5 and see if you get a CLI output.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Nickel
Sent: Wednesday, May 05, 2010 8:39 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Hash Dial Pattern Problems

 

I am sorry it is not 1.6 but 1.4.30 (argh.. to many boxes)

The other box is running 1.2.1

Thanks,

David

On Wed, May 5, 2010 at 9:28 AM, Danny Nicholas <danny at debsinc.com> wrote:

Which 1.6 are you running?  I dropped my 1.6.1.6 back to 1.4.30 because my
other 2 1.4.30 boxes wouldn't talk to it properly.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Nickel
Sent: Wednesday, May 05, 2010 8:23 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Hash Dial Pattern Problems

 

I have two Asterisk boxe. One is running 1.6 and the other 1.2 

The users on the 1.2 system press # plus a local 7 digit number to place
local calls through the trunk to the 1.6 box. 

For some reason this dial pattern fails right away with "unavailable". There
is no activity in the CLI. Other patterns for the trunk work just fine. 

Dial pattern: 
#|. or #|NXXXXXX 

exten => _#.,1,Dial(IAX2/trunk/${EXTEN:1},30,r) 
exten => _#.,2,Congestion 

I have been beating my end with the problem for three days. Any suggestions
would be much appreciated. 


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100505/6f218e74/attachment.htm