[asterisk-users] B400P card crashes conncection

[Peter Gelencser]

Unfortunately no, it did not solve my problem, the sitation is the same. 
Any other hint?


Best regards,
Peter Gelencser



2010.05.01. 9:38 keltezéssel, Rudi Oosthuizen írta:
> Had a similar problem with a B410p BRI card. Had to enable (or disable)
> the 100ohms termination jumper on the card, because the telco provider
> uses different exchanges ( Maybe someone can give more clarity on this?)
>
> Maybe it’s the same problem, enabling resolved my issue.
>
> Grep chan_dahdi /var/log/asterisk/full | grep –i “pri got event” should
> also give indication off errors on the line from the telco side, if
> cleared should be no errors.
>
> Rudi Oosthuizen
>
> Ø Hi,
>
> Ø I have a B400P BRI card with point-to-point connection (signalling:
>
> Ø bri_cpe) with this dmesg: http://pastebin.com/sXrRt1yM
>
> Ø When i restart asterisk server, the card cannot connect to the telco,
> the control led flashes red. If I unplug the cable between the ISDN nt
> and the card and wait 40 sec, the card can connect and works properly.
>
> Ø The telco says the asterisk crashes the connection with the telco,
> when I let the NT reconnect, the card connects properly.
>
> Ø Do you have any idea how to solve this problem? Thanks for any help in
> advance.
>
> Ø Best regards,
>
> Ø Peter Gelencser
>