[asterisk-users] Trying to configure xorcom on Suse 11

[Tim Panton]

On 28 Mar 2010, at 10:13, Tzafrir Cohen wrote:

> On Sat, Mar 27, 2010 at 04:48:41PM -0500, Tim Panton wrote:
>> I'm having trouble getting a xorcom set up.
>> 
>> A large part of the problem is that the box is a _long_ way away and 
>> I can't get to/at it easily, so while I could probably fix this in a few
>> hours if the machine were in front of me, I'm struggling over a slow
>> unreliable laggy link. 
>> 
>> Ok, enough whining from me.
>> 
>> I have a new Xorcom plugged into the usb of a Suse 11 machine
>> I built Dahdi from trunk (last thursday) 
>> 
>> # svn checkout http://svn.digium.com/svn/dahdi/linux/trunk dahdi-linux
>> # svn checkout http://svn.digium.com/svn/dahdi/tools/trunk dahdi-tools
>> 
>> dahdihardware -v sees the box but no spans.
> 
> Generally '/etc/init.d/dahdi start' . Or more specifically,
> 'dahdi_registration on' .
> 
> See also:
> 
>  http://docs.tzafrir.org.il/dahdi-tools/README.Astribank.html#_installation_scenarios


I've must be missing something here - this is what I see now.....

sh-4.0# dahdi_hardware -v
usb:001/020          xpp_usb+     e4e4:1162 Astribank-modular FPGA-firmware
 LABEL=[usb:X1037246]       CONNECTOR=@usb-0000:00:1a.7-4 

Shouldn't I see spans ??? I think the box (I've never seen it, but I know what I asked for) 
has 8fxs+8fxo+2E1 . 


Thanks, 
Tim.



Tim Panton - Web/VoIP consultant and implementor
www.westhawk.co.uk