[asterisk-users] Asterisk to be used with Ciscs media gateways

[Peder]

Under the dial-peer on the Cisco change these two things:
no incoming called-number .T
destination-pattern 07028XXXXX   (use the actual number to match or .'s for
wildcard)


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mohit Saxena
Sent: Tuesday, March 16, 2010 2:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk to be used with Ciscs media gateways

Still no luck....

Br,
Mohit

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Peder
Sent: Monday, March 15, 2010 6:54 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Asterisk to be used with Ciscs media gateways

exten=07028XXXXXX,1,Dial(SIP/${EXTEN}@PCCW-KPN)

You aren't sending an outbound DID with just SIP/PCCW-KPN.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mohit Saxena
Sent: Monday, March 15, 2010 12:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk to be used with Ciscs media gateways

Sip.comf

[PCCW-KPN]
type=peer
host=41.205.190.15
allow=ulaw
qualify=100
nat=no
canreinvite=no
user=07028000709


extension.conf
exten=07028XXXXXX,1,Dial(SIP/PCCW-KPN)

Cisco Gateway:
dial-peer voice 110 voip
description Voip peer to test the server
destination-pattern 1234
session protocol sipv2
session target ipv4:196.3.60.24
session transport udp
incoming called-number .T
dtmf-relay rtp-nte
codec g711ulaw
fax-relay ecm disable  fax rate 9600  fax protocol t38 ls-redundancy 1
hs-redundancy 1 fallback pass-through g711ulaw
clid strip

Br,
Mohit C. Saxena I Data/ISP Department
Starcomms Plc.
1261c Bishop Kale Close, Victoria Island, Lagos, Nigeria,  +234-702-8000-709
email:mohits at starcomms.com
www.starcomms.com


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim Nelson
Sent: Monday, March 15, 2010 6:13 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk to be used with Ciscs media gateways

Continuing with the top posting parade...

Can you post your {sanitized} sip.conf and your extensions.conf for
inspection?

--Tim

----- "Mohit Saxena" <MohitS at starcomms.com> wrote:
> The problem is not with cisco as the SIP header on debug doesn't
> contain the called number. It only says To:sip:ip add of cisco gw. It
> should say number:ip addr of cisco gw.
>
> Br,
> Mohit C. Saxena I Data/ISP Department
> Starcomms Plc.
> 1261c Bishop Kale Close, Victoria Island, Lagos, Nigeria,
> +234-702-8000-709 email:mohits at starcomms.com
> www.starcomms.com
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David
> Backeberg
> Sent: Monday, March 15, 2010 5:48 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Asterisk to be used with Ciscs media
> gateways
>
> On Mon, Mar 15, 2010 at 4:42 AM, Mohit Saxena <MohitS at starcomms.com>
> wrote:
> > I have been trying to do this since 2 days but couldn't make
> it....need your help..
>
> Well, you could certainly ask Cisco for help.
> You did pay Cisco money, right?
>
> > PSTN-----Cisco AS5350-------Asterisk Box--------VoIP Providers
>
> > I am able to place call from cisco gateway to the asterisk box and
> also to some softphones extensions but >when making a call from
> softphone from asterisk box to PSTN, it fails. While I debug on Cisco
> gateway I found >that the To field is SIP header is coming as
> sip:41.205.190.15 which is not correct, instead it should be dialed
> >number:41.205.190.15
>
> Then the problem seems to be between your asterisk box and your
> Cisco.
> Perhaps if you told us what you were trying to SIP dial, we would be
> able to tell us what you did wrong.
>
> > Has any one of you tried using Asterisk in this scenario
>
> yes.
>
> > and also to do LCR and Quality based routing of International
> calls?
>
> I don't know what that means.
>
> > Please let me know if there is any documentation /example of this
> kind available
>
> There is.
> cisco.com
> you pay them, then you can use their documentation.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


DISCLAIMER: The information contained in this message (including any
attachments) is confidential and may be privileged. If you have received it
by mistake please notify the sender by return e-mail and permanently delete
this message and any attachments from your system. Any form of
dissemination, use, review, distribution, printing or copying of this
message in whole or in part is strictly prohibited if you are not the
intended recipient of this e-mail. Please note that e-mails are susceptible
to change. STARCOMMS PLC shall not be liable for the improper or incomplete
transmission of the information contained in this communication nor for any
delay in its receipt or damage to your system. STARCOMMS PLC does not
guarantee that the integrity of this communication has been maintained or
that this communication is free of viruses, interceptions or interferences.
STARCOMMS PLC reserves the right to monitor all e-mail communications,
whether related to the business of STARCOMMS or
  not, through its internal or external networks.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users