[asterisk-users] dahdi-2.2.1 & kernel-2.6.32: working for anyone?

[sean darcy]

I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and 
installed dahdi-2.2.1.

kernel modules loaded.
lsmod | grep wctdm
wctdm                  37233  0
dahdi                 194985  1 wctdm

  lsmod | grep dahdi
dahdi                 194985  1 wctdm
crc_ccitt               1549  2 dahdi,isdnhdlc

dmesg:

dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.2.1
.....
dahdi_dummy: Trying to load High Resolution Timer
dahdi_dummy: Initialized High Resolution Timer
dahdi_dummy: Starting High Resolution Timer
dahdi_dummy: High Resolution Timer started, good to go

which is much less dmesg on 2.6.31:

dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.2.1
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
wctdm 0000:01:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
Freshmaker version: 73
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXS/DPO
Module 2: Not installed
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules)

and dahdi_cfg fails:

dahdi_cfg -vvvvvv
DAHDI Tools Version - 2.2.1

DAHDI Version: 2.2.1
Echo Canceller(s):
Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)

3 channels to configure.

DAHDI_CHANCONFIG failed on channel 1: No such device or address (6)

I tried dahdi svn r8255 from today. Same result.

If I reboot with 2.6.31, all's well.

Am I missing something?

sean