[asterisk-users] InterPBX communication using SIP

[khalid touati]

OK Guys i got fixed the phones i was using were registered in both servers
which is not good, once i removed them it started working!

2010/3/4 khalid touati <khalidtouati at gmail.com>

> Hi Guys,
> i am using the following config in pbx1:
> register => pbx1:endopass at 172.16.200.175 <pbx1%3Aendopass at 172.16.200.175>
> [pbx2]
> type=friend
> host=dynamic
> trunk=yes
> sercret=password
> context=[default]
> deny=0.0.0.0/0.0.0.0
> permit=172.16.200.175/255.255.255.128
>
> in pbx2:
> register => pbx2:endopass at 172.16.200.176 <pbx2%3Aendopass at 172.16.200.176>
> [pbx1]
> type=friend
> host=dynamic
> trunk=yes
> sercret=password
> context=[default]
> deny=0.0.0.0/0.0.0.0
> permit=172.16.200.176/255.255.255.128
>
> and i get the following in pbx1:
> -- Executing [18021 at default:1] Dial("SIP/8029-b7413678",
> "SIP/pbx2/8021||TWw") in new stack
>     -- Called pbx2/8021
> [Mar  4 16:49:13] WARNING[3392]: chan_sip.c:12679 handle_response_invite:
> Received response: "Forbidden" from '"Khalid Touati" <
> sip:8029 at 172.16.200.176 <sip%3A8029 at 172.16.200.176>>;tag=as1dcf5ff2'
>     -- SIP/pbx2-09cf4468 is circuit-busy
>   == Everyone is busy/congested at this time (1:0/1/0)
>   == Auto fallthrough, channel 'SIP/8029-b7413678' status is 'CONGESTION'
>
> though i am using the same config in IAX and it's working fine, also it's
> in the same context (so i believe it's a context issue).
>
>
> --
> Abdullah
>



-- 
Abdullah
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100305/2ca97a46/attachment.htm