[asterisk-users] Caller ID in Asterisk

[Peter Gelencser]

As far as I know, you should set up the callerid in the chan_dahdi.conf 
with the usecallerid=yes and the callerid=8001234001 options where you 
are setting the each channels.


Regards,
Peter Gelencser


2010.03.05. 7:54 keltezéssel, Gopalakrishnaiyer Venugopal-Q16770 írta:
> Hi All,
>
> Finally I am able to get the number displayed at the SIP side using
>
> exten => _988.,1,Set(CALLERID(num)=8001234000)
>
> exten => _988.,n,Dial(DAHDI/g1/${EXTEN},20)
>
> However this number is fixed and I want to display the number of the
> individual lines whoever is calling. I tried with
>
> exten => _988.,1,Set(CALLERID(num)=${exten}) and exten =>
> _988.,1,Set(CALLERID(num)=${EXTEN})
>
> Both the above lines didn’t help.
>
> I have 8 lines configured as below and need the callerID of the
> individual lines to be displayed at the SIP side
>
> exten => 8001234001,n,Dial(DAHDI/32,,rt)
>
> exten => 8001234002,n,Dial(DAHDI/33,,rt)
>
> exten => 8001234003,n,Dial(DAHDI/34,,rt)
>
> exten => 8001234004,n,Dial(DAHDI/35,,rt)
>
> exten => 8001234005,n,Dial(DAHDI/36,,rt)
>
> exten => 8001234006,n,Dial(DAHDI/37,,rt)
>
> exten => 8001234007,n,Dial(DAHDI/38,,rt)
>
> exten => 8001234008,n,Dial(DAHDI/39,,rt)
>
> Warm Regards
>
> Warm Regards
> Venugopal G
> HNM-SO WiMAX CPE VoIP IOT Team
> Cell : +91-99723-99437
> *************************************************************************************************************************************************************************************************
>
>
> ------------------------------------------------------------------------
> *From:* Gopalakrishnaiyer Venugopal-Q16770
> *Sent:* Thursday, March 04, 2010 6:36 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion; Asterisk
> Users Mailing List - Non-Commercial Discussion
> *Subject:* RE: [asterisk-users] Caller ID in Asterisk
>
> Hi Jimmy,
> Appreciate your help.
> I tried the one below and cudnt get the caller ID.I am getting "Private
> Call" and "Out of Area" in the sip phone display when i call from asterisk.
> My current extensions.conf looks like below
> [general]
> static=yes
> writeprotect=no
> autofallthrough=no
> extenpatternmatchnew=no
> clearglobalvars=no
> priorityjumping=yes
> userscontext=default
> [globals]
> CONSOLE=Console/dsp ; Console interface for demo
> ;CONSOLE=DAHDI/1
> ;CONSOLE=Phone/phone0
> IAXINFO=guest ; IAXtel username/password
> ;IAXINFO=myuser:mypass
> TRUNK=DAHDI/G1
> TRUNKMSD=1
>
>
> [Internal]
> include => Incoming
>
> exten => 8001234001,1,Dial(DAHDI/32,,rt)
> exten => 8001234002,1,Dial(DAHDI/33,,rt)
> exten => 8001234003,1,Dial(DAHDI/34,,rt)
> exten => 8001234004,1,Set(CALLERID(num)=8001234004)
> exten => 8001234004,n,Set(CALLERID(name)="Line 4")
> exten => 8001234004,3,Dial(DAHDI/35,,rt)
> exten => 8001234005,1,Dial(DAHDI/36,,rt)
> [Incoming]
> exten => s,1,Answer
> exten => s,2,Dial(DAHDI/g1,20,rt)
> exten => _988.,1,Dial(DAHDI/g1/${EXTEN},20)
> I also tried changing the dial plan to exten =>
> _988.,3,Dial(DAHDI/g1/${EXTEN},20) and in that case the call itself was
> not going through
> Venugopal
>
> ------------------------------------------------------------------------
> *From:* asterisk-users-bounces at lists.digium.com on behalf of Jimmy Godbout
> *Sent:* Thu 3/4/2010 5:53 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Caller ID in Asterisk
>
> Hi,
> You need to set the callerid before making the call, not after. Also, I
> guess it's a typo that the priority in this dialplan is all 1; it should be
> exten => 8001234003,1,Set(CALLERID(num)=8001234003)
> exten => 8001234003,n,Set(CALLERID(name)="Line 5")
> exten => 8001234003,n,Dial(DAHDI/34,,rt)
>
> Unless your using variable for the name and the number, you should not
> put them in ${}.
>
> Jimmy
>
>     -----Original Message-----
>     *From:* venuiyer at motorola.com
>     *Sent:* Thu, 4 Mar 2010 19:50:03 +0800
>     *To:* asterisk-users at lists.digium.com,
>     asterisk-users at lists.digium.com, asterisk-users at lists.digium.com
>     *Subject:* Re: [asterisk-users] Caller ID in Asterisk
>
>     HI All,
>     Below is the ones i tried
>     exten => 8001234003,1,Dial(DAHDI/34,,rt)
>     exten => 8001234003,1,Set(CALLERID(num)=${8001234003})
>     exten => 8001234003,1,Set(CALLERID(name)=${Line 5})
>     However i got an error message sayinfg Function CallerID not registered.
>     Kindly help me...
>
>     ------------------------------------------------------------------------
>     *From:* asterisk-users-bounces at lists.digium.com on behalf of
>     Gopalakrishnaiyer Venugopal-Q16770
>     *Sent:* Thu 3/4/2010 3:59 PM
>     *To:* Asterisk Users Mailing List - Non-Commercial Discussion;
>     asterisk-users at lists.digium.com
>     *Subject:* [asterisk-users] Caller ID in Asterisk
>
>     Hi All,
>     I have an asterik machine which is connected via a PRI to the SIP
>     server.When i call from the Asterisk machine to the SIP server i am
>     not getting the caller id of the lines at the sip side.
>     Please help me to identify how this can be set.The extensions.conf
>     file is attached.
>     Cheers
>     venu
>
> ------------------------------------------------------------------------
> Email Notifier Preview <http://www.inbox.com/notifier>
> *Receive Notifications of Incoming Messages*
> Easily monitor multiple email accounts & access them with a click. Visit
> www.inbox.com/notifier <http://www.inbox.com/notifier> and check it out!
>