[asterisk-users] Got Anonymous from DID incoming call and can't re-send to another asterisk with new callerid

[D Tucny]

On 26 February 2010 12:38, Trevor Peirce <tpeirce at digitalcon.ca> wrote:

> Charles Wang wrote:
> > The sip.conf of MYE1 likes below:
> > [MYPBX]
> > type=peer
> > host=mypbx.abc.com <http://mypbx.abc.com>
> > nat=no
> > disallow=all
> > allow=g729
> > canreinvite=yes
> > qualify=no
> > context=default
> > insecure=port,invite
>
> Add sendrpid=yes here.
>
> > The sip.conf of MYPBX likes below:
> > [MYE1]
> > type=peer
> > host=mye1.abc.com <http://mye1.abc.com>
> > nat=no
> > disallow=all
> > allow=g729
> > canreinvite=yes
> > qualify=no
> > context=did
> > insecure=port,invite
>
> Add trustrpid=yes here.
>
> >    A. Why can't I receive the CALLERID from MYPBX(the secondary
> > server)? I am sure I use Set(CALLERID(num) for it.
> >
> >    B. Why does the CALLERID that sends from MYE1 become
> > as "Anonymous"? How can I fix it with the correct orginal
> > callerid(912345678)?
> >
> >    C. Why does my FROM message become as "Anonymous"
> > <sip:Anonymous at anonymous.invalid> instead of  912345678 at mye1.abc.com
> > <mailto:912345678 at mye1.abc.com> ?
>
> You see this because, even though the number has been made available to
> you, it's marked as a blocked call.  Your server is honoring this and
> blocking the number when it dials the next server.  By using Remote
> Party ID, you'll be able to carry this information forward to your next
> server.
>
>
Or you could override the presentation using CallerPres function (in 1.6) or
SetCallerPres dialplan command in previous versions...

e.g. Set(CallerPres()=allowed) before doing the Dial to MYPBX.

d
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100302/294a743a/attachment.htm