[asterisk-users] RE How to break pri DID to multiple SIP Trunks

[Dovid Bender]

Samantha,

Are you using some type of GUI ? If you send all the traffic to a specific context in there you can set a default route to one peer and then set exceptions for the others. For example

[from-pri]

Exten => _X.,1,Dial(SIP/${EXTEN}@peer1)

Exten => _X612111180X,1,Dial(SIP/${EXTEN}@peer2)


  ----- Original Message ----- 
  From: Samantha 
  To: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Wednesday, June 30, 2010 05:58
  Subject: [asterisk-users] RE How to break pri DID to multiple SIP Trunks


  Hey Guys

   

  I have an indial range of 61211118[01234]X  being trunked sip to xxx.yyy.189.65

   

  Now I want to break this down into 612111180x going to xxx.yyy.188.145 and 612111184x going to xxx.yyy.189.199
  reminder being used for fax->email  etc etc etc

   

  I have created the outbound routes and sip trunks

  I can see that all the sip trunks are up 
  I can see the outbound routes are there and also in trunks

   

  But it isn't working

   

  The call gets answered by the first point xxx.yyy.189.69 and you get an rva of the number you called is not in service

   

   

  Regards

   

  Samantha

   

   

   



------------------------------------------------------------------------------


  -- 
  _____________________________________________________________________
  -- Bandwidth and Colocation Provided by http://www.api-digital.com --
  New to Asterisk? Join us for a live introductory webinar every Thurs:
                 http://www.asterisk.org/hello

  asterisk-users mailing list
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100630/c5e0ee8a/attachment.htm