[asterisk-users] Configure WAN Phone

[dotnetdub]

On 25 June 2010 16:23, Nicholas Hart <nhart at partsauthority.com> wrote:

>
> Hi,
>
> I am relatively new to Asterisk and am looking for help in configuring an
> IP based phone.  This phone is not on the same subnet as the PBX.  I read
> that there could be an issue with NAT so I am bypassing this by connecting
> temporarily with an Internet IP.  So far, I have configured the server
> extension with the phone MAC address along with configuring the phone unit
> with IP, Gateway and SIP info.  Upon rebooting the phone, I am getting 'NO
> Service' message.   Kind of surprised there is no IP option on the PBX
> Manager for this extension.  Any help would be much appreciated.  Thanks.
>
> Info:
> Asterisk v.  C.3.3.2
> thirdlane PBX Manager
> Aastra 6757i phone
> Internet provider  -  Fios  (perhaps they are blocking ports?)
>
> Best,
> Nick
>
>
There is quite a bit of configuration to do to achieve what your trying to
do. You need to setup a TFTP server. The handset needs to know the address
of the TFTP server to download the config.
Head over to the thirdlane.com forums - they are a helpful bunch. Eric's
bark is worse than his bite :)


Brian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100625/a537b0a4/attachment.htm