[asterisk-users] UDPTL T38 via NAT

[Remco Bressers]

On 06/22/2010 04:38 PM, marek cervenka wrote:
>> On 06/22/2010 02:51 PM, Johann Steinwendtner wrote:
>>> On 2010-06-22 12:36, Remco Bressers wrote:
>>>> Dear list,
>>>>
>>>> I've got the following setup :
>>>>
>>>> [FAX-ATA]--[PBX LAN]--[Firewall]--[PBX WAN]-----[upstream SIP]
>>>>
>>>> On the PBX's we run Asterisk 1.4.33 with t38pt_udptl=yes in [general].
>>>> The FAX ATA is a Teles VoIPBox with T.38 support (that works). On the
>>>> PBX WAN, i see the following in udptl debug :
>>>>
>>>> Sent UDPTL packet to 172.16.0.156:4460 (type 0, seq 184, len 32)
>>>> Got UDPTL packet from 62.180.xx.xx:36170 (type 0, seq 0, len 32)
>>>> Sent UDPTL packet to 172.16.0.156:4460 (type 0, seq 185, len 32)
>>>> Got UDPTL packet from 62.180.xx.xx:36170 (type 0, seq 0, len 32)
>>>> Sent UDPTL packet to 172.16.0.156:4460 (type 0, seq 186, len 32)
>>>> Got UDPTL packet from 62.180.xx.xx:36170 (type 0, seq 0, len 29)
>>>>
>>>> This means my outgoing udptl traffic is correctly translated, but
>>>> somehow i'm sending 172.16.0.156 instead of my public IP address on the
>>>> firewall.
> 
> try asterisk 1.6.2.9

What would be the reason to do that? Is there any change on this in 1.6.2.9?

-- 
Regards,
Signet bv


Remco Bressers

T 040 - 707 4 907
F 040 - 707 4 909
E rbressers at signet.nl